OzVMX Forum

Marketplace => Wanted => Topic started by: Paul Jeffs on September 02, 2017, 01:51:20 pm

Title: 1983-5 kdx200
Post by: Paul Jeffs on September 02, 2017, 01:51:20 pm

Hi
Looking for a stator/generator for 83-85 kdx200. Cheers Paul 0414637751

Title: Re: 1983-5 kdx200
Post by: kdx Geoff on September 02, 2017, 03:32:28 pm

If you have an old one that's not up to the task, there's people that fix them.

 

Title: Re: 1983-5 kdx200
Post by: Paul Jeffs on September 11, 2017, 03:37:48 pm

I don't have a plate Geoff. Can anyone tell me I'd a 86-88 stator and CDI will work?

Title: Re: 1983-5 kdx200
Post by: kdx Geoff on September 11, 2017, 04:49:17 pm

Quote from: Paul Jeffs on September 11, 2017, 03:37:48 pm

I don't have a plate Geoff. Can anyone tell me I'd a 86-88 stator and CDI will work?

The flywheel is slightly bigger on the 86-88 200 so l don't see that the parts will interchange.

EDIT

Partzilla says that the left side of the crankshaft is the same from '83 to '87 so there's a possibility an ignition/flywheel might fit from the P/Valve motor.
That's not to say that slightly bigger flywheel will fit behind the cover though.
The right side of the crank is different because the primary drive gear is splined onto the P/V crank/
The P/V motor will fit in the early frame with a slight mod the exhaust header angle.

Title: Re: 1983-5 kdx200
Post by: Paul Jeffs on September 11, 2017, 06:29:10 pm

Thanks for the info Geoff. There are a couple of stators on a,erican ebay but I've noticed they have one less wire than my manual shows. The three to the CDI are the same but the American ones only have one other yellow wire. My manual shows a green wire as well. Is this something to do with Australian compliance?

Title: Re: 1983-5 kdx200
Post by: kdx Geoff on September 11, 2017, 06:33:49 pm

We have 2 power wires, one for the lights (like the US) and one for our ADR battery to charge.

Title: Re: 1983-5 kdx200
Post by: Paul Jeffs on September 11, 2017, 06:59:10 pm

Thanks Geoff. Much appreciated

Title: Re: 1983-5 kdx200
Post by: kdx Geoff on September 12, 2017, 04:37:48 pm

Quote from: Paul Jeffs on September 11, 2017, 06:59:10 pm

Thanks Geoff. Much appreciated

 :)