OzVMX Forum

Marketplace => Wanted => Topic started by: mickenno on August 26, 2017, 09:38:54 pm

Title: Marzocchi bushes
Post by: mickenno on August 26, 2017, 09:38:54 pm

Looking for 41.7mm marzocchi fork seals and bushes for my 86 125 Cagiva. 

Title: Re: Marzocchi bushes
Post by: oz555ktm on August 26, 2017, 10:02:19 pm

Does  your have 2 bushes 1 in the tube and  1 on the end of the slider ???

I had PD valves fitted to mine the the Bloke left Off and then Lost the Slider Bush's

so I hope someone can help you ..

The Seals any Good Bike shop ......I mean a Good Old  Bike shop....

 

Title: Re: Marzocchi bushes
Post by: mickenno on August 28, 2017, 07:13:30 pm

yes has 2 bushes as you describe. Looks like we may have to get some made.

Title: Re: Marzocchi bushes
Post by: ozktm on August 29, 2017, 07:51:51 am

I'll try my mate in Italy, he had some previously.

Title: Re: Marzocchi bushes
Post by: ozktm on August 29, 2017, 08:08:50 am

Paolo replied :
"Unfortunately no: only the top scrapers and the internal caps on the screw cap.The forks are the same mounted on the Cagiva WMX: the only difference is that they have painted gray liners compared to the KTM."

Sorry guys, looks like you will have to get something made to suit...unless you find some NOS parts.

Regards,

Title: Re: Marzocchi bushes
Post by: Wasp on August 29, 2017, 11:12:33 am

What are the dimensions , I may have some for you .

Title: Re: Marzocchi bushes
Post by: mickenno on August 31, 2017, 06:15:27 am

Bush size. 39.8 id x 44.8 od x 15 x 1.5 thick.  Thanks for your help. 

Title: Re: Marzocchi bushes
Post by: Wasp on August 31, 2017, 09:31:52 am

Just checked stock . I cant help you sorry .  Perhaps machining some up could be an option ?

Title: Re: Marzocchi bushes
Post by: mickenno on August 31, 2017, 01:30:47 pm

Thanks to you all for your assistance.  Looks like we will have to make them.    Cheers Mick.