OzVMX Forum
Marketplace => Wanted => Topic started by: Huck on August 15, 2017, 06:55:54 pm
-
Hi all, am after 6x cylinder studs for 79/80 RM400
p/n 09108-08067
Cheers
-
Suzuki Dealer
-
http://www.mickhone.com.au/part/suzuki/0910808018#contentArea
-
should be about $4-$5 ea at any Suzuki Dealer in Oz.
-
That link is for the wrong part number.
They were never used on other bikes, only
the 79/80 RM400
All websites list as obsolete
-
Look at Partsshark Suzuki USA website, there seem to be 3 different size studs, and all are available from suzuki aust.
-
There you go, I know that many models use the stud I referenced above but the 400 is an oddball it appears.
Send me the dimensions of an old stud if you have one and I will see what might match up.
-
There you go, I know that many models use the stud I referenced above but the 400 is an oddball it appears.
Send me the dimensions of an old stud if you have one and I will see what might match up.
Yeh never used them on any other bike, bugger!
Here's a thread on the same issue from about 18mth ago:
http://forum.ozvmx.com/index.php?topic=39944.msg383211#msg383211
I don't have a stud that I can check, but I believe the image below to be correct
Am happy if I dont get the titanium option 8)
(http://i1105.photobucket.com/albums/h357/30782/TI%20VS%20STD_zpsxj3df8yd.jpg~original)
-
Look at Partsshark Suzuki USA website, there seem to be 3 different size studs, and all are available from suzuki aust.
Nope that's a fail, part 09108-08067 not available
-
Help yourself out here mate. What length do you require ? The cylinder heads can be counterbored, shorter studs may still give you 6 threads of nut engagement, longer ones are obviously no problem.
-
Help yourself out here mate. What length do you require ? The cylinder heads can be counterbored, shorter studs may still give you 6 threads of nut engagement, longer ones are obviously no problem.
59mm would be perfect, just like the pic above!
I'm not into machining anything out at this stage, cheers anyway.