OzVMX Forum
Marketplace => Wanted => Topic started by: sleepy on July 21, 2017, 10:56:23 am
-
Anyone got a water cooled head to suit a CR125 1976/77 or earlier would fit as well.
Have a classic road racer customer that thinks he needs to go with water cooling.
-
Does such a thing exist? Mugen done a top end kit but it was still aircooled for the red frame M series 125's,Which is 76/77, There was a Mugen watercooled kit for the later R series twin shocks I think :)
-
MT125R's from the mid to late 70's ( 1977/78) ran water cooled barrels and heads, the kick starter shaft area was the water pump housing was located, CR125M bottom, road racing pre NSR125
Google it, saw a clutch cover with water pump on evil bay once upon a time.
centre code 325 i believe
link to a bike for sale, with spare parts http://automotoclassicsale.com/node/31619
try the NZ and UK historic road racing seen.
Regards Gibbsy
-
Does such a thing exist? Mugen done a top end kit but it was still aircooled for the red frame M series 125's,Which is 76/77, There was a Mugen watercooled kit for the later R series twin shocks I think :)
They did exist, probably quite rare. Found this in Google, Shinobi branded.
https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcSP4dN6JKdIQoODHzDpdc3Kmc0_BKpOJUzOnIxTzk-GZwLpRstG
For water pumps the road guy's use a little electric pump which seems to do the job as they only do short races.
-
Does such a thing exist? Mugen done a top end kit but it was still aircooled for the red frame M series 125's,Which is 76/77, There was a Mugen watercooled kit for the later R series twin shocks I think :)
They did exist, probably quite rare. Found this in Google, Shinobi branded.
https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcSP4dN6JKdIQoODHzDpdc3Kmc0_BKpOJUzOnIxTzk-GZwLpRstG
For water pumps the road guy's use a little electric pump which seems to do the job as they only do short races.
There ya go, very interesting, sounds like the MTR top end mentioned above maybe easier to locate than the Shinobi :)