OzVMX Forum

Marque Remarks => Honda => Topic started by: bazza on July 09, 2017, 11:34:07 am

Title: M2 1976 CR250 timing URGENT!!
Post by: bazza on July 09, 2017, 11:34:07 am

Thanks mike
Also is M2 1976 timing 1.5mm BTDC ?

Title: Re: M1 CR250 Points gap and timing
Post by: sleepy on July 11, 2017, 06:36:56 pm

Only got a manual for the "M" model but it has the timing at 1.5mm and the points 12 to 20. Points gap is not critical on something like that, just set the points then do timing.

Title: Re: M2 1976 CR250 timing URGENT!!
Post by: bazza on July 18, 2017, 03:15:19 pm

urgent please

Title: Re: M2 1976 CR250 timing URGENT!!
Post by: 80-85 husky on July 18, 2017, 09:36:34 pm

see if you can get hold of macka McKenzie, he knows the elsinores inside out. i think he is gold coast motorcycles???

Title: Re: M2 1976 CR250 timing URGENT!!
Post by: Tony.Brown on July 20, 2017, 03:37:13 pm

Well I'll be buggered, I had no idea that was Wayne!

Title: Re: M2 1976 CR250 timing URGENT!!
Post by: jimg1au on July 20, 2017, 09:03:38 pm

if its the same as the 73/74 all you need is a set of feeler gauges and a cigerette paper
the timing mark should be on the plate aline the two pointers as the paper is pulled out of the points ie just opening
thats how i used to do it
jim