OzVMX Forum

Marketplace => Wanted => Topic started by: Bell moto on June 07, 2017, 05:25:22 pm

Title: YZ125G clutch basket wanted
Post by: Bell moto on June 07, 2017, 05:25:22 pm: Hi race fans, looking for a clutch basket for a mates 1980 YZ125G.
Partzilla tells me these other models will work also, so if anyone has a clutch from one of these in good nick I would be interested. Cheers, Bell.

PRODUCT OBSOLETE
This Yamaha 3R3-16150-00-00 PRI DRVN GEAR is used on these models and components:

1980 YZ125G CLUTCH YZ125G
1982 YZ100J CLUTCH
1983 YZ100K CLUTCH

PRODUCT OBSOLETE
This Yamaha 1W1-16150-01-00 PRI DRVN GEAR is used on these models and components:

1977 IT175D CLUTCH
1977 YZ125D CLUTCH YZ125D
1978 IT175E CLUTCH
1978 YZ125E CLUTCH YZ125E - F
1979 IT175F CLUTCH
1979 YZ125F CLUTCH YZ125E - F
1980 DT125G CLUTCH
1980 DT175G CLUTCH
1980 IT125G CLUTCH
1980 YZ125G CLUTCH YZ125E - F
1981 DT125H CLUTCH
1981 DT175H CLUTCH
1981 IT125H CLUTCH
1990 RT180A CLUTCH
1991 RT180B CLUTCH
1992 RT180D CLUTCH
1993 RT180E CLUTCH
1995 RT180G CLUTCH
1996 RT180H CLUTCH
1997 RT180J CLUTCH
1998 RT180K CLUTCH
Title: Re: YZ125G clutch basket wanted
Post by: Digga on June 07, 2017, 07:00:28 pm: Try contacting this guy in the USA. He makes billet baskets, so they are not cheap but very good quality, Rolls Royce ;)

Rick Becker

[email protected]
Title: Re: YZ125G clutch basket wanted
Post by: matcho mick on June 08, 2017, 10:40:58 pm: don't think scottys' going to go there digga ;D, :P
Title: Re: YZ125G clutch basket wanted
Post by: Bell moto on June 09, 2017, 11:24:29 am: OK, for anyone who is interested, I contacted Rick in the US as suggested by Digga.
Reply confirms that he does make them out of billet 6061-t6 and sells them for $225 US with black anodizing.
That works out to be $300 AU plus postage.
Bummer is - out of stock till late July.
Title: Re: YZ125G clutch basket wanted
Post by: Hoony on June 09, 2017, 05:58:37 pm: did you look into Mitaka clutch baskets ?

http://www.mitaka.co.uk/clutch_baskets.htm
Title: Re: YZ125G clutch basket wanted
Post by: Bell moto on June 09, 2017, 06:15:32 pm: Yep looked at Mataka, they didn't list any thing earlier than 1983, price was better - around $160 AU on average.
Title: Re: YZ125G clutch basket wanted
Post by: mboddy on June 09, 2017, 08:24:54 pm: The 1W1 clutch basket with primary is not the same as the 3R3-16150-00 used on the YZ125G.
According to my parts lists the 1W1 has 71 teeth and the 3R3 has 62 teeth.
Title: Re: YZ125G clutch basket wanted
Post by: Bell moto on June 09, 2017, 10:05:40 pm: Good pick up, will make sure to swap in if needed.
Title: Re: YZ125G clutch basket wanted
Post by: matcho mick on June 10, 2017, 06:58:28 pm: have DT175 clutch,has 71 teeth,also a yz125? 6 speed clutch which only has 51 teeth,(& very narrow,1/2 width of DT's) :P
Title: Re: YZ125G clutch basket wanted
Post by: Bell moto on June 10, 2017, 11:49:53 pm: DT may be a winner Mick. Are ya going to Bulahdelah mate?
If not I could swing By and see if its a match.
Title: Re: YZ125G clutch basket wanted
Post by: mboddy on June 11, 2017, 09:08:47 am: Quote from: Bell moto on June 10, 2017, 11:49:53 pm
DT may be a winner Mick.

No. 1W1 is not the same as 3R3. You misunderstood Partzilla. Read my previous post again.
Title: Re: YZ125G clutch basket wanted
Post by: Bell moto on June 11, 2017, 10:54:58 am: Clutch coming out of our 125G has 1w1 stamped on it. if we can find a replacement and we need to change the gear on it to 62 tooth we have one here. (wish ya could get this stuff off the shelf)
Title: Re: YZ125G clutch basket wanted
Post by: matcho mick on June 11, 2017, 12:48:09 pm: yes mate,be at bulah,will bring it with me,it's got 2A7-00 on basket but??,6 steel rivetts to primary gear, :P
Title: Re: YZ125G clutch basket wanted
Post by: Bell moto on June 13, 2017, 06:36:28 pm: Hey Mick, from what I can tell your clutch 2A7, could be 1978 DT 175E.
Also , I cant make it to Canowindra so will have to drop over to check out your clutch to see if we can make it work.
Cheers.