OzVMX Forum

Marque Remarks => Husqvarna => Topic started by: PBMGold on June 05, 2017, 03:13:11 pm

Title: Help: Torque Settings for Cylinder Head 1983 XC500 Husky
Post by: PBMGold on June 05, 2017, 03:13:11 pm

Can anyone advise what the torque settings are for 1983 500 Husky cylinder head. Thanks.

Title: Re: Help: Torque Settings for Cylinder Head 1983 XC500 Husky
Post by: b490 on June 05, 2017, 06:45:25 pm

 The 4 x Cylinder head Nuts : 33Nm
 The 2 x Cylinder head Bolts : 25Nm

 Regards ,
                   Steve
                     

Title: Re: Help: Torque Settings for Cylinder Head 1983 XC500 Husky
Post by: 80-85 husky on June 05, 2017, 06:50:16 pm

hva factory have downloadable manuals etc...I think it has a tech details doc with all those numbers

Title: Re: Help: Torque Settings for Cylinder Head 1983 XC500 Husky
Post by: PBMGold on June 06, 2017, 09:16:58 am

Thanks Steve, extremely helpful.

Tried HVA Factory and Café Husky and both have 4 Stroke Manuals but only a Parts list for the 2 strokes. Café Husky has nearly every other year as I would love to get a Workshop Manual for XC500 1983 and WR250 1983. So far no luck, although open to any other suggestions.

Title: Re: Help: Torque Settings for Cylinder Head 1983 XC500 Husky
Post by: b490 on June 06, 2017, 03:18:47 pm

Very good ,  timely  &  reliable,   supplier of  Husky bits  & has  (CD ) manuals available too :)
 
 Reasonable shipping rates , on previous purchases  , but be sure to email ( as requsted)  prior to placing order.

http://www.husqvarna-parts.com/page/page/4106636.htm

 Regards ,
                 Steve