OzVMX Forum

Marketplace => Wanted => Topic started by: ghostdancing on May 14, 2017, 12:20:44 am

Title: TT250 1980 carburetor
Post by: ghostdancing on May 14, 2017, 12:20:44 am

i'm after a good TT250 (ohc 2 valve) carby

Title: Re: TT250 1980 carburetor
Post by: James Lee on May 14, 2017, 10:25:45 pm

Are they different to XT? I have a few if so.

Title: Re: TT250 1980 carburetor
Post by: ghostdancing on May 15, 2017, 12:13:04 am

yes, XT's are 28mm keyhole duct design, TT's are 30mm oval duct;i do have the XT OEM carby on my bike (XT250) rejetted it to match free flow exhaust, but i feel a (slight) larger carb should give more energy @middle\higher rpm.. that's why want to try the TT carb..

Title: Re: TT250 1980 carburetor
Post by: 80-85 husky on May 15, 2017, 07:57:38 am

just buy a new 30mm mikuni?

Title: Re: TT250 1980 carburetor
Post by: James Lee on May 15, 2017, 07:59:47 am

Let me check,I have a carb left over from my SP370 build that I didn't use,might be 30mm.

Title: Re: TT250 1980 carburetor
Post by: Ekka on May 15, 2017, 09:42:39 am

I have a body of one id that helps

Title: Re: TT250 1980 carburetor
Post by: ghostdancing on May 15, 2017, 07:54:18 pm

tnx guys for your help; yes i can buy on of these off the shelf mikuni VM.. they are cheap priced, but of course comes wrong jetted, (BTW it's a 2stroke intended carburetor)... there are also some people republic's manifactured carbs on ebay that can work (kehin copy, they sold them as direct fit on XL250 ).. but the real thing will be easier to fit (no problem with my OEM (and new) head boot and the airbox duct...just plug and play.. also looks like this swap it's alredy be done and works..

next rainy day will try to mount a larger main jet (now it's 180, will try a 190, stock was 165) on the XT carb..

Title: Re: TT250 1980 carburetor
Post by: Gerard De Ruyter (Twistandshout) on May 23, 2017, 09:03:12 am

I have one or two as well ghosty and some carby parts for them.

Title: Re: TT250 1980 carburetor
Post by: ghostdancing on May 23, 2017, 07:59:33 pm

pm sent..

Title: Re: TT250 1980 carburetor
Post by: ghostdancing on May 25, 2017, 03:31:43 pm

Gerard.. have you received my message?