OzVMX Forum

Clubroom => General Discussion => Topic started by: bigk on March 14, 2017, 01:46:43 pm

Title: Part identification
Post by: bigk on March 14, 2017, 01:46:43 pm

I have an unknown fitment TK (Kijima) porcupine cylinder head. I thought it was for CR125M but alas, no. The head stud spacings are 52mm x 69mm, the combustion chamber width is 56mm (so 125 I guess), it has a flat surface to take a head gasket with dowel holes front & rear. It's in fantastic condition with zero fin damage & I'd almost say it's never been used (no tell tale marks on plug or bolt surfaces). Be a shame not to use it on something. Don't know how to post photos on here or I would. Any help with ID much appreciated. Thanks in advance.
K

Title: Re: Part identification
Post by: Hoony on March 14, 2017, 02:14:15 pm

G'day Mick,

you can upload pics to facebook and link them here. that will work. test below

(https://scontent-syd2-1.xx.fbcdn.net/v/t1.0-9/17264373_1499004986777750_3215030803273508100_n.jpg?oh=098575baa8d347262d3460a5e63df66f&oe=5963FD10)

Title: Re: Part identification
Post by: Tim754 on March 14, 2017, 02:52:22 pm

Sounds 125 Super Combat Hodaka-ish maybe if my memory is working....

Title: Re: Part identification
Post by: 80-85 husky on March 14, 2017, 04:20:37 pm

hey mick, give john maclean a toot, he will have a head gasket to try