OzVMX Forum

Marque Remarks => Honda => Topic started by: jimg1au on February 25, 2017, 07:27:06 am

Title: honda xl250 34mm mikuni jetting
Post by: jimg1au on February 25, 2017, 07:27:06 am

hi
I am building a elstar xl250 dirtrack bike need some info on 34mm mikuni jetting
anyone help
thanks
jim

Title: Re: honda xl250 34mm mikuni jetting
Post by: bazza on February 25, 2017, 02:44:51 pm

Hatricks mikuni were 95% spot on for my mikuni on a 298cc kitted XL

Title: Re: honda xl250 34mm mikuni jetting
Post by: jc17 on March 08, 2017, 07:55:03 pm

I have the Sudco Mikuni specs for a 32mm Mikuni: Main Jet 4/042 #170, Pilot Jet VM22/210 #25, Needle Jet 159 P5, Throttle Valve VM32/66 3.0, Air Jet BS30/97 2.0, Needle Valve VM34/39 3.3 and Needle 6F4-3.
Hope this helps.
Regards
John

Title: Re: honda xl250 34mm mikuni jetting
Post by: jimg1au on March 08, 2017, 10:02:55 pm

Thanks thats great