OzVMX Forum
Marketplace => Wanted => Topic started by: LWC82PE on January 18, 2017, 11:00:28 pm
-
I am looking for some 35mm Marzocchi triple clamps for leading axle forks from 76-77 era Euro bikes, Canam or aftermarket Jap fitment. Not 100% sure what I want/need exactly as I don’t know what is/was available, but I believe these all have 25mm offset which is fine and I prefer laid back bar mounts. Seems like the double pinch bolts only came in the 80’s? so I think they need to have only single 10mm? pinch bolts to be from 76-77 era. I am not really sure though. I think the ones I would need have ‘Marzocchi’ cast into the lower clamp and not the fork/wheel logo. I am not really sure what exact bikes would have the clamps I want yet so its making it hard trying to look for them.
-
Hi
i have a set 35 mm Marzocchi triples laying around from a KTM with a leading axle fork .
i will try to locate them and take some pictures and measuremends
parts are in the Netherlands tho .
Eldert
-
Thankyou that sounds good.
-
Leith, as a last resort, check with VTR Vinduro, he "ahem" acquired some leading axle Marzocchi forks from me years ago, can't remember if there were triples though.
Tony.
-
Still looking for clamps
This type but without a lot of those extra holes drilled in them which i think were for Canams. The ones i have seen from KTM's did not have the holes.
(http://i1105.photobucket.com/albums/h357/30782/marz%20clamps2_zps8qxxi9cl.jpg~original)
-
I found some triples at a Marzocchi specialist in UK so I got them but they are missing the handle bar half clamps. So i just need a pair of those now.