OzVMX Forum

Clubroom => Tech Talk => Topic started by: Chilly on October 11, 2016, 09:17:58 pm

Title: Carby question
Post by: Chilly on October 11, 2016, 09:17:58 pm

Need some advice, 89 Husky WRK 250 had a delorto unit and is shagged but the bike came with a 2nd hand minkuni flat slide. Motor is soon to go back together once the cylinder comes back from electrosil. Not wanting to damage the fresh engine I want to be sure jetting is close before I start it. If the jets in the minkuni are a similar size to the ones in the delorto will this be close enough?

Title: Re: Carby question
Post by: 80-85 husky on October 12, 2016, 09:02:06 am

should be close. check jetting for a comparable 250 with a mikuni.