OzVMX Forum

Marque Remarks => Italian (Moto Villa, Beta, SWM etc) => Topic started by: Lozza on August 25, 2016, 04:40:39 pm

Title: Rotax 124/ Can Am MX-6 seal kits
Post by: Lozza on August 25, 2016, 04:40:39 pm

Can anyone point me to the best place to get a seal kit?
Cheers

Title: Re: Rotax 124/ Can Am MX-6 seal kits
Post by: gra1961 on August 30, 2016, 07:34:18 am

floods maybe,i still get stuff for my 4 stroke rotax motor from them

Title: Re: Rotax 124/ Can Am MX-6 seal kits
Post by: Lozza on August 31, 2016, 09:39:47 pm

Cheers for that but I would prefer not to have to take out a second mortage  ;) off to Tony Murphy then.............

Title: Re: Rotax 124/ Can Am MX-6 seal kits
Post by: evo550 on September 01, 2016, 08:52:53 pm

It's not any cheaper from the U.S....Rotax parts fcuk me >:(
not wanting to insult anyones intelligence, but you've checked bearing shops right?

Title: Re: Rotax 124/ Can Am MX-6 seal kits
Post by: Lozza on September 01, 2016, 09:41:12 pm

Tony does me a good deal. There is one seal that is unique 28x38x5mm. Rotax seals are not common run of the mill lip seals inner seal is teflon.
Bearings/o rings from the bearing shop no problems

Title: Re: Rotax 124/ Can Am MX-6 seal kits
Post by: evo550 on September 12, 2016, 07:15:55 pm

Quote from: evo550 on September 01, 2016, 08:52:53 pm

It's not any cheaper from the U.S....Rotax parts fcuk me >:(
not wanting to insult anyones intelligence, but you've checked bearing shops right?

I take that back  $480 aud for a 406 piston  :o :o