OzVMX Forum

Marketplace => Wanted => Topic started by: Curtis on August 20, 2016, 07:45:41 am

Title: Husky roller
Post by: Curtis on August 20, 2016, 07:45:41 am: Husqvarna roller, anything twin shock, alloy tank model considered.
Title: Re: Husky roller
Post by: 80-85 husky on August 20, 2016, 08:34:36 am: pm Big k, I think he will have something
Title: Re: Husky roller
Post by: Natroy on August 20, 2016, 06:16:46 pm: I have a 74 CR400 frame, front end, tank (with some rust), seat, hubs and motor.
If you're interested, I will itemize the parts I got and take some pics.
Title: Re: Husky roller
Post by: Curtis on August 21, 2016, 11:12:52 pm: 74 is a bit earlier than what I was after, cheers
Title: Re: Husky roller
Post by: Kel on November 09, 2016, 08:17:25 am: Hi Curtis, I have a 1979 Husky 390 roller with a fair amount of bits attached.
If you are interested PM me and I can send you some pictures
Regards
Kel
Title: Re: Husky roller
Post by: hoppy on November 09, 2016, 11:17:50 am: Hello I have a 82 XC roller if your interested..

Cheers Rob
Title: Re: Husky roller
Post by: maicoman18 on November 09, 2016, 05:05:30 pm: Sorry to butt in but:- Natroy, what are you asking for the bits you have and where ("the bloody hell") are you located?

Ed
Title: Re: Husky roller
Post by: roon on November 09, 2016, 07:25:40 pm: I might have a 1976 CC175 roller available soon
Title: Re: Husky roller
Post by: BSA-B5 on November 09, 2016, 09:59:33 pm: I have a 72 frame, triple clamps, excellent forks, for sale
Title: Re: Husky roller
Post by: davidmc on November 10, 2016, 09:20:53 am: I have a 1977 roller for sale
Title: Re: Husky roller
Post by: HVA61 on November 10, 2016, 01:12:34 pm: I'm interested in the 77 roller.
Title: Re: Husky roller
Post by: Natroy on November 10, 2016, 04:11:05 pm: Quote from: maicoman18 on November 09, 2016, 05:05:30 pm
Sorry to butt in but:- Natroy, what are you asking for the bits you have and where ("the bloody hell") are you located?

Ed
I'm locared in Orange, NSW. I want $1000. If you are interested, give me your email or phone number, and I'll take some pics and send them to you.
Natroy.
Title: Re: Husky roller
Post by: Curtis on November 11, 2016, 09:04:16 am: Wonder what year would be the best donor to put the Yammy 500 in?
Title: Re: Husky roller
Post by: maicoman18 on November 11, 2016, 05:45:54 pm: thanks Natroy
reasonable price but more than I have to spare. If I win lotto, I'll certainly come knocking.

Ed
Title: Re: Husky roller
Post by: TT5 Matt on November 11, 2016, 05:57:49 pm: 76,77,78 is the go, 79 on had double back bone tubes and no room for the tall 500 thumper motor. ask colj500 on here as he's done one
Title: Re: Husky roller
Post by: Colin Jay on November 11, 2016, 11:21:08 pm: Quote from: Curtis on November 11, 2016, 09:04:16 am
Wonder what year would be the best donor to put the Yammy 500 in?

Here is a picture of my 1978 390 AMX frame fitted with a SR500 engine. Front forks are YZ465. I built this in 1981 after the auto tranny let me down in the 4-day that year. It was campaigned in MX and enduros for a few years with the 500 engine.

(http://i150.photobucket.com/albums/s120/coljay/SR500mx-81.jpg)

Don't despair Husky lovers, the AMX engine was refitted a few year back and the bike get the occasional outing. I have a 1978 CR frame in the shed that I will one day fit a 500 engine into, I just need a bit of time and money.