OzVMX Forum

Clubroom => Bike Talk => Topic started by: micko on July 29, 2016, 11:08:46 pm

Title: YZ250A Pistons
Post by: micko on July 29, 2016, 11:08:46 pm

The YZ is starting to get abit rattly in the top end, haven't had a look yet but are Pistons easy to come by ?

Title: Re: YZ250A Pistons
Post by: Rossvickicampbell on July 30, 2016, 11:06:46 am

Mick - Speed and Sport list lots of pistons through second oversize - but not cheap.  NWVCP list nothing which is quite surprising and these are 250A pistons - some of the other guys will have to come on and advise of whether DT pistons etc fit the 250A as happens with the B's.

Not much genuine listed on Ebay either.

Hope that helps

Rossco

Title: Re: YZ250A Pistons
Post by: Iain Cameron on July 30, 2016, 01:52:02 pm

I'm sure the DT2MX pistons will fit but use the YZ rings if you still have the chrome bore . Iain

Title: Re: YZ250A Pistons
Post by: micko on August 08, 2016, 03:34:27 pm

go lucky, found one in oz. cheers