OzVMX Forum

Marque Remarks => Husqvarna => Topic started by: 80-85 husky on July 04, 2016, 08:44:53 am

Title: 85 510 delorto carb bits
Post by: 80-85 husky on July 04, 2016, 08:44:53 am

where can I source a needle and needle jet in aus for the delorto?

Title: Re: 85 510 delorto carb bits
Post by: bigk on July 04, 2016, 11:08:30 am

Do you know what numbers you need?
K

Title: Re: 85 510 delorto carb bits
Post by: 80-85 husky on July 04, 2016, 11:49:12 am

ill be back nxt week, ill strip and sort out what I need. cheers

Title: Re: 85 510 delorto carb bits
Post by: PEZBerq on July 12, 2016, 07:30:55 am

I have been getting all my Dellorto parts from Eurocarb in the UK. Massive stock. If there is an Aussie source then I would gladly use it.

Title: Re: 85 510 delorto carb bits
Post by: gra1961 on July 12, 2016, 07:38:42 am

gowanlocks in sydney ive bought jets etc from them

Title: Re: 85 510 delorto carb bits
Post by: jimg1au on July 12, 2016, 09:52:32 am

I bought a gasket kit from gowanlocks for my speedway jawa
took a couple of weeks but they got it for me

Title: Re: 85 510 delorto carb bits
Post by: Tony.Brown on July 13, 2016, 06:24:39 am

If  it's a PHM40, then parts should be available, KTM used them until the late 90's on their LC4 range. May just be able to order what you need from ABS Motorcycles?
Tony.

Title: Re: 85 510 delorto carb bits
Post by: 80-85 husky on July 13, 2016, 08:56:01 am

not any more....no longer kato dealers. boltons may have them ill give fred a call

Title: Re: 85 510 delorto carb bits
Post by: Maicoman on July 13, 2016, 06:34:12 pm

Quote from: gra1961 on July 12, 2016, 07:38:42 am

gowanlocks in sydney ive bought jets etc from them

I agree. Been buying stuff for my Ducati's for years from them. Recently bought a choke assembly and gasket kit for a mates 2003 Husky TE400.

Just payed over the phone was here in a day or two.

Title: Re: 85 510 delorto carb bits
Post by: PEZBerq on July 13, 2016, 09:36:21 pm

Thanks. Excellent selection.

https://ducati-gowanloch.com/product-category/carburettor-fuel/dellorto-parts (https://ducati-gowanloch.com/product-category/carburettor-fuel/dellorto-parts)

Title: Re: 85 510 delorto carb bits
Post by: Lozza on July 14, 2016, 11:13:11 am

GPS imports in Melbourne are the Dellorto importers

http://www.gpsimports.com.au/products.php?productCategoryId=344&Level=1

Title: Re: 85 510 delorto carb bits
Post by: 80-85 husky on July 14, 2016, 08:00:25 pm

the book says std is a k32 but all I can see is k17 on g locks site....best ring em up

Title: Re: 85 510 delorto carb bits
Post by: Lozza on July 15, 2016, 09:13:02 pm

https://www.eurobrit.com.au/store/New+Dellorto+parts/Dellorto+K32+Needle

Title: Re: 85 510 delorto carb bits
Post by: 80-85 husky on July 16, 2016, 09:30:19 am

thanks for that, also saved me asking the next question about where is the no? just need to pull the slide and see whats actually in it. will prob replace the needle jet as well as I cant see why that wouldn't be just as worn.