OzVMX Forum

Clubroom => Tech Talk => Topic started by: steve7406 on June 04, 2016, 05:17:58 pm

Title: Pvl
Post by: steve7406 on June 04, 2016, 05:17:58 pm

Where can I get a pvl ignition for a 73 mx 250 here in oz if possible

Title: Re: Pvl
Post by: steve7406 on June 05, 2016, 04:34:01 pm

Looks like no body sells pvl ignitions here in oz no wonder the country is going down the shitter looks like I'll spend my Aussie dollars overseas

Title: Re: Pvl
Post by: Rossvickicampbell on June 05, 2016, 04:58:19 pm

I bought parts for my PVL from VMX Unlimited - wanted to go local - however doubt I will do it again and for PVL will go straight to Penton in the US.

Title: Re: Pvl
Post by: steve7406 on June 05, 2016, 05:03:06 pm

Thanks I'd like to buy local and keep some money here but looks like it will all go os

Title: Re: Pvl
Post by: KTMaico on June 05, 2016, 05:14:18 pm

Steve,
          Go to www.dmon-parts.de or www.selettra.de you will find PVL and Selettra ignitions and they are a lot cheaper than any other supplier US or AUS. Can't remember the guy's name that helped me but I found him very good and they can supply more than just parts, very knowledgable about ignitions.

Kevin

Title: Re: Pvl
Post by: steve7406 on June 05, 2016, 06:01:17 pm

Thanks KTMaico will try them tomorrow

Title: Re: Pvl
Post by: Momus on June 05, 2016, 06:24:00 pm

http://www.treatland.tv/selettra-CDI-p/derbi-selettra-cdi-ee.001.01.htm

Have a look here as well; $230 US for a complete set up.

Title: Re: Pvl
Post by: curly001 on June 05, 2016, 06:55:14 pm

Steve an alterative to PVL is avaiable from

rexs-speedshop.com

You need to score a DT flywheel.

Title: Re: Pvl
Post by: Rossvickicampbell on June 05, 2016, 10:24:05 pm

or if you want to go hunting around - try Rex Caunt in the UK - brilliant backup and service.

Title: Re: Pvl
Post by: Lozza on June 06, 2016, 12:30:23 am

Quote from: steve7406 on June 05, 2016, 04:34:01 pm

Looks like no body sells pvl ignitions here in oz no wonder the country is going down the shitter looks like I'll spend my Aussie dollars overseas

I get fully programmable ignitions (universal) that will run off a fair few magnetos (RM 125, CR 125 or KTM 125/250/300/380) or run off a regulator/rectifier from a CR 250 to convert to 12v DC. Around $280-300 depnding on the exchange rate.

Title: Re: Pvl
Post by: GD66 on June 06, 2016, 12:27:34 pm

Quote from: Rossvickicampbell on June 05, 2016, 10:24:05 pm

or if you want to go hunting around - try Rex Caunt in the UK - brilliant backup and service.

He doesn't come cheap but he is one bloke who definitely does get off his bum and get back to you, quite rare in dealing with blokes in the UK from this side of the globe. Right with you there, Rossco. 8)

Title: Re: Pvl
Post by: Bamford#69 on June 06, 2016, 04:08:18 pm

Hi,
Yes , Rex Gaunt , great to do business with , highly recommended.
cheers

Title: Re: Pvl
Post by: bazza on June 06, 2016, 06:50:30 pm

Rex has a good reputation

Title: Re: Pvl
Post by: steve7406 on June 07, 2016, 06:30:24 pm

Thanks everyone great leeds

Title: Re: Pvl
Post by: Murph on July 26, 2016, 07:17:51 am

If you need Selettra ignitions you can try Kevin Breedon here in the UK.  He is really helpful :

http://www.kevinbreedonracing.co.uk/Products/Ignitions/