OzVMX Forum

Marque Remarks => KTM => Topic started by: 80-85 husky on May 23, 2016, 09:09:20 pm

Title: 84 85 carb issues
Post by: 80-85 husky on May 23, 2016, 09:09:20 pm
Ol mate has just reassembled an 84 / 85 250 (bert flood enduro model) and he is finding the slide wont bottom out unless he cracks the top cap to let air in?? with t sealed nice, it runs on enough tp be annoying. is this a well known issue?
Title: Re: 84 85 carb issues
Post by: oz555ktm on May 23, 2016, 10:47:30 pm

Check the spring for binding  in the slide or on its self ...

the slides don't seal that well .... :o
Title: Re: 84 85 carb issues
Post by: Moto on May 24, 2016, 07:49:44 am
If its a Bing 54 Carby,(two screws in top type) the top of the carby can be put on 180 degrees out.
Take the top off and check that the cable is pulling straight into the slide.The other way around will cause the slide to bind.