OzVMX Forum

Marque Remarks => Spaniards (Bultaco, Ossa, Montesa etc) => Topic started by: Dungar Pilot on April 20, 2016, 08:47:38 pm

Title: MONTESA SPOKES NEEDED
Post by: Dungar Pilot on April 20, 2016, 08:47:38 pm

Hi All,

Yes I just read to topic down the list, I am rebuilding a pair of VA Cappra wheels and need some spokes for both front and rear to complete and have some Spares?

It seems a little odd I know but I have enough nipples,  can anyone help me with some spokes Please? 

Thanks in advance

Title: Re: MONTESA SPOKES NEEDED
Post by: HeavenVMX on April 21, 2016, 12:46:45 am

same spokes for all 21/18" wheels from VR-VF MXers and 250/360 Enduros up to and including H6. Spokes are readily available on ebay or Jared at SW Montesa in the US. The nipples are the hard part to get and the thread is unusual. It is almost as cheap to get a complete set from Titmans or Buchanans.

Title: Re: MONTESA SPOKES NEEDED
Post by: jerry on April 21, 2016, 07:09:06 am

Where are you located Dungar? J

Title: Re: MONTESA SPOKES NEEDED
Post by: Dungar Pilot on April 21, 2016, 10:19:00 am

Hi All,

Quote from: jerry on April 21, 2016, 07:09:06 am

Where are you located Dungar? J

Thanks for the replies, I only need a few of each without buying complete sets and I do have Nipples!
Coffs Harbour Jerry, they are small enough to post and I am happy to pay. How many do you Have?
Cheers

Title: Re: MONTESA SPOKES NEEDED
Post by: jerry on April 21, 2016, 12:52:27 pm

Hi Dungar I don't have any spokes but I can put you onto a bloke here in Victoria who can make spokes. Let me know if you want his contact details. J

Title: Re: MONTESA SPOKES NEEDED
Post by: Dungar Pilot on April 30, 2016, 08:47:30 am

Hi All,

Quote from: jerry on April 21, 2016, 12:52:27 pm

Hi Dungar I don't have any spokes but I can put you onto a bloke here in Victoria who can make spokes. Let me know if you want his contact details. J

Thanks Jerry but perhaps I should have stated that I didn't want to disrupt years of nice patina with Shiny new Spokes?
Old ones with similar patina is my first choice, Oh did I mention that I have nipples?
(http://i48.photobucket.com/albums/f202/Boggomobile/Mobile%20Uploads/1461969222180_zpswthnvekj.jpg) (http://s48.photobucket.com/user/Boggomobile/media/Mobile%20Uploads/1461969222180_zpswthnvekj.jpg.html)

Title: Re: MONTESA SPOKES NEEDED
Post by: cappra on April 30, 2016, 09:41:15 am

I have tons of NOS spokes, but no oem nipples.

                                                             Regards, Jared
                                                             S/W Montesa

Title: Re: MONTESA SPOKES NEEDED
Post by: Dungar Pilot on May 01, 2016, 07:08:39 am

Hi All,

Quote from: cappra on April 30, 2016, 09:41:15 am

I have tons of NOS spokes, but no oem nipples.

                                                             Regards, Jared
                                                             S/W Montesa

Jared, I am impressed you have tons of NOS spokes :D :D :D and sad that you have no oem nipples  :( :( :(
How much would you charge me in Aussie Dollars for a front set of spokes only (about 2/3rds of a kilo) and post to Coffs Harbour NSW
2450? I can age them myself and I will use my nipples.

Title: Re: MONTESA SPOKES NEEDED
Post by: cappra on May 03, 2016, 03:12:47 pm

Spokes are .60 cents ea.  36 spokes @ .60 ea. = $21.60 (28.00 AUS)
Mailing for 1.4 lbs is $22.75 (29.51 AUS)

18 x 6650.008
 9 x 6650.00703
 9 x 6650.00702

Title: Re: MONTESA SPOKES NEEDED
Post by: Dungar Pilot on May 04, 2016, 01:01:08 pm

Hi All,

Quote from: cappra on May 03, 2016, 03:12:47 pm

Spokes are .60 cents ea.  36 spokes @ .60 ea. = $21.60 (28.00 AUS)
Mailing for 1.4 lbs is $22.75 (29.51 AUS)

18 x 6650.008
 9 x 6650.00703
 9 x 6650.00702

Thanks Jared, that is quite reasonable, you have a PM!