OzVMX Forum

Clubroom => Introductions => Topic started by: fast850 on April 02, 2016, 05:33:36 pm

Title: basket case
Post by: fast850 on April 02, 2016, 05:33:36 pm

Hi All,   Just new here and still finding my way around in here,  I have a husky plated as a 84  500 AE and the no,s on the crank case tell me the motor is from a 82 430.
I am in need of a crank stub{not shore if this the right terminology} That holds the magneto on and has a left hand thread on the end. and a clutch cover, If any one could assist me with any info I would be very grateful.
I am located in SE Qld.  With Thanks.

Title: Re: basket case
Post by: grouty on April 05, 2016, 08:28:28 pm

The ignition side stub shafts are all the same on 82-84 models. 240/250/430 and 500's. Manual and Auto.
Part number is 16 11 659-01

NOS ones available here - http://hva-factory.com/bottom-end-gearbox/husqvarna-ignition-side-crank-end-161165901-16-11-659-01 (http://hva-factory.com/bottom-end-gearbox/husqvarna-ignition-side-crank-end-161165901-16-11-659-01)

Ignition covers here - http://hva-factory.com/bottom-end-gearbox/husqvarna-ignition-cover-81-88-factory-part-16-11-640-01-original-unpainted (http://hva-factory.com/bottom-end-gearbox/husqvarna-ignition-cover-81-88-factory-part-16-11-640-01-original-unpainted)