OzVMX Forum

Marque Remarks => KTM => Topic started by: subarumy98 on April 02, 2016, 09:51:47 am

Title: KTM 250. 1982-Need stiffer springs
Post by: subarumy98 on April 02, 2016, 09:51:47 am

Hi all

Any leads on stiffening the Pro Lever rear and Marzocci forks.

Keen to. Hear what has worked.

T

Title: Re: KTM 250. 1982-Need stiffer springs
Post by: LWC82PE on April 02, 2016, 04:03:50 pm

Any of these WP springs ok? They re specifically for Marzocchi forks
Just put number into KTM parts search engine online eg Boltons

Order is part number-spring OD – length – rate – wire dia

9932.0042.C – 28 – 550 – 4.5N/mm – 6.5N/mm - 4.4
9932.0054.B – 29.0 – 485 – 5.1N/mm – 7.8N/mm - 4.5
9932.0080.B – 31.2 – 460 – 4.9N/mm – 7.8N/mm - 4.6
9932.0081.C – 31.2 – 495 – 5.0N/mm- 6.7N/mm  - 4.75
9932.0107.C – 33.5 – 505 – 5.9N/mm – 8.6N/mm -  5.25
9932.0194.B – 31.2 – 500 –5.0N/mm – 6.7N/mm -  4.75

Title: Re: KTM 250. 1982-Need stiffer springs
Post by: bigk on April 02, 2016, 05:40:23 pm

Or go non genuine, Racetech, Teknik plus a myriad of others. Not hard to source. You can even get them made for a reasonable price if all else fails.
K

Title: Re: KTM 250. 1982-Need stiffer springs
Post by: LWC82PE on April 02, 2016, 06:31:29 pm

The springs i listed are aftermarket WP, its just that KTM handles WP Suspension these days. All WP numbers are in the KTM database. The ones i listed are for Marzocchis from 35mm up to about 42mm or so. Eibach might be another option too.I am sure RT would have a solution though.

Title: Re: KTM 250. 1982-Need stiffer springs
Post by: subarumy98 on April 03, 2016, 08:49:18 am

Thanks for the help so far - but not out of the woods yet..

Manual states part #514353, with a free length of 630mm,
No rate indicated.

The rear spring is listed at 564.04.011.200,

Unfortunately this doesn.t match yet.