OzVMX Forum

Clubroom => General Discussion => Topic started by: amj 56 on February 29, 2016, 08:53:19 pm

Title: Wide footpegs for CR 125m
Post by: amj 56 on February 29, 2016, 08:53:19 pm

Hi Guys looking at fitting a set of wide foot pegs to my 74 cr125m.Looking at either VMX Racing or VMX Unlimited to buy a set from, any thoughts on their product,or is one as good as the other.
How have you found their service in general, thanks.

Allan

Title: Re: Wide footpegs for CR 125m
Post by: Rossvickicampbell on February 29, 2016, 08:59:50 pm

I send my standard pegs to Geoff Morris - who mods them and sends back - can be assured of them fitting then ;D

Title: Re: Wide footpegs for CR 125m
Post by: roost250 on March 01, 2016, 12:02:57 am

Crf50 pegs apparently.  Others may know more about that.

Title: Re: Wide footpegs for CR 125m
Post by: bazza on March 01, 2016, 03:39:51 pm

cr23oF from memory

Title: Re: Wide footpegs for CR 125m
Post by: micks on March 01, 2016, 08:21:52 pm

hope this helps   http://forum.ozvmx.com/index.php?topic=18553.0  one day will get to this but always remember elsie 125 tip   

Title: Re: Wide footpegs for CR 125m
Post by: YZ250H on March 02, 2016, 10:52:27 am

Those "cheap" pegs I bought are still going strong after all this time.  The mounts on my bike were a bit worn so I had to beef up the pegs a bit where they hit the frame.
Good as gold  8)

Title: Re: Wide footpegs for CR 125m
Post by: Josha on March 03, 2016, 10:10:53 pm

I got these off a local chinese bike dealer but they can be had on eBay for around $35. They fit straight on my MT250 without any mods and included pins and springs.

(http://i1144.photobucket.com/albums/o494/joshacool2/1975%20Honda%20MT%20250/20160218_180059_zpsrlwpyf2n.jpg) (http://s1144.photobucket.com/user/joshacool2/media/1975%20Honda%20MT%20250/20160218_180059_zpsrlwpyf2n.jpg.html)