OzVMX Forum

Clubroom => Tech Talk => Topic started by: micko on February 15, 2016, 07:47:42 pm

Title: YZ250A ignition timing
Post by: micko on February 15, 2016, 07:47:42 pm

After specs for the above, standard ignition.
Thanks in advance

Title: Re: YZ250A ignition timing
Post by: Lozza on February 15, 2016, 10:32:52 pm

Quote from: micko on February 15, 2016, 07:47:42 pm

After specs for the above, standard ignition.
Thanks in advance

Boom tish.................I got it  ;)

Do you want to know what it is or should be?

Title: Re: YZ250A ignition timing
Post by: sleepy on February 16, 2016, 12:17:06 pm

Quote from: micko on February 15, 2016, 07:47:42 pm

After specs for the above, standard ignition.
Thanks in advance

It is listed as 2.3mm BTDC.  There should be marks on the stator and flywheel that line up at 2.3mm.

Title: Re: YZ250A ignition timing
Post by: micko on February 16, 2016, 04:12:37 pm

Thanks sleepy, that's a starting point, Any extra info appreciated :)

Title: Re: YZ250A ignition timing
Post by: sleepy on February 16, 2016, 11:57:24 pm

Not sure what extra info you are asking about?

Title: Re: YZ250A ignition timing
Post by: micko on February 17, 2016, 01:17:23 am

Quote from: sleepy on February 16, 2016, 11:57:24 pm

Not sure what extra info you are asking about?

All good, thanks

Title: Re: YZ250A ignition timing
Post by: micko on March 26, 2016, 12:16:44 pm

Quote from: Lozza on February 15, 2016, 10:32:52 pm

Quote from: micko on February 15, 2016, 07:47:42 pm

After specs for the above, standard ignition.
Thanks in advance

Boom tish.................I got it  ;)

Do you want to know what it is or should be?

Yes And yes Lozza ! ????