OzVMX Forum

Marque Remarks => Spaniards (Bultaco, Ossa, Montesa etc) => Topic started by: farmer58za on November 29, 2015, 04:51:01 am

Title: 360 H6 Exhaust flange.
Post by: farmer58za on November 29, 2015, 04:51:01 am

Hi All
I see that there is no exhaust gasket listed in the H6 parts list. It looks like the pipe sits in a small tapered recess in the cylinder, held in with a collar which has springs and nuts on the exhaust studs.

Do I have to seal the pipe/cylinder interface with, say, silicone sealer?

Thanks
David

Title: Re: 360 H6 Exhaust flange.
Post by: cappra on November 30, 2015, 03:46:36 pm

Not really needed. But, I do spread a little hi heat silicone on the pipe end. It can't hurt!

Title: Re: 360 H6 Exhaust flange.
Post by: farmer58za on December 02, 2015, 09:53:49 pm

Thanks
I did the silicone thing.
Regards
David