OzVMX Forum

Marketplace => Wanted => Topic started by: John Orchard on November 23, 2015, 10:18:06 pm

Title: WANTED - RM/TM100/125 original look 428 rear sprocket.
Post by: John Orchard on November 23, 2015, 10:18:06 pm

Hey Guy's,

I have a friend who is rebuilding an RM125A, he wants an original looking rear sprocket (with the large round cut-out holes), he'd prefer silver alloy but will take a steel, I reckon he could repaint a black one silver.

He'd prefer a 57 teeth, the bike will be ridden rarely so a real good used one would be ok.

He actually works for Suzuki Australia, he might be able to repay a favour?  ;-)

Title: Re: WANTED - RM/TM100/125 original look 428 rear sprocket.
Post by: bigk on November 24, 2015, 07:07:58 am

Should have a good used original, I'll have a look & be back to you.
K

Title: Re: WANTED - RM/TM100/125 original look 428 rear sprocket.
Post by: bigk on November 24, 2015, 02:06:34 pm

There's one genuine 57t alloy sprocket there, not perfect but useable. Let me know where to send a photo to.
Cheers,
K

Title: Re: WANTED - RM/TM100/125 original look 428 rear sprocket.
Post by: pmc57 on November 25, 2015, 09:38:58 pm

Try JTR (John Titman Racing) for a blank. He has Talon 428 blanks in 53-59T. Then you just have to machine the ID out, drill the bolt holes and then get the large cut-out holes machined. It's a bit of dicking about but it will do the job and will look the part. I did exactly that for my RM125S.

Here's the link;

 http://issuu.com/johntitmanracing/docs/talon_2015_-_www.jtr.com.au/23?e=8647141/11910222