OzVMX Forum

Marketplace => Wanted => Topic started by: FourstrokeForever on November 13, 2015, 02:48:13 pm

Title: KLX250 bash plate WANTED
Post by: FourstrokeForever on November 13, 2015, 02:48:13 pm

As per heading....also any leads on where to get good plastics for the old jigger. I really want to avoid DC if possible.

Thanks

Title: Re: KLX250 bash plate WANTED
Post by: GMC on November 19, 2015, 10:32:32 pm

Have headlight shroud, sidecovers and rear guard in stock for this model.
Yes they are DC but I reckon they are acceptable, run them on my own bikes and they look fine, most people are surprised that they are DC as they seem to expect something really bad.

Vacuum formed plastics are never going to be the same as injection molded parts and with injection molds running into tens of grands per piece it's a brave entrepreneur that sets up for every piece of plastic for every model for every year for every brand.
Not aware of anyone else making KDX/KLX plastics.

Anyway, if your ever over this way your welcome to drop in and check them out.

Title: Re: KLX250 bash plate WANTED
Post by: FourstrokeForever on November 21, 2015, 08:57:54 am

Thanks Geoff. I'll keep that in mind

Title: Re: KLX250 bash plate WANTED
Post by: FourstrokeForever on December 31, 2015, 08:39:15 am

Still looking for a bash plate people......

Title: Re: KLX250 bash plate WANTED
Post by: TT5 Matt on December 31, 2015, 01:55:55 pm

2 got wrecked at the wreckers here so should be a bash plate there somewhere,ill have aloook around when he reopens

Title: Re: KLX250 bash plate WANTED
Post by: FourstrokeForever on January 01, 2016, 08:26:15 am

Thanks...Much appreciated

Title: Re: KLX250 bash plate WANTED
Post by: TT5 Matt on January 07, 2016, 12:22:02 am

nothing here,someone came and brought everything to do with klx's

Title: Re: KLX250 bash plate WANTED
Post by: FourstrokeForever on January 07, 2016, 08:48:35 am

Thanks for your effort anyway.

Cheers