OzVMX Forum

Marque Remarks => Suzuki => Topic started by: vlxk on November 05, 2015, 12:42:58 pm

Title: RM250 case saver
Post by: vlxk on November 05, 2015, 12:42:58 pm

My C2 has the OE counter shaft sprocket cover, is there an aftermarket case saver?

The bike has new sprockets and chain, I replaced the rollers in the tensioner but the spring is a bit weak I suspect.

I'm afraid of a chain derail in the future wrecking the case.

I have plenty of scrap steel and aluminum available if anyone has a pattern I'd just make my own.

Thanks guys.

Title: Re: RM250 case saver
Post by: micko on November 07, 2015, 01:03:00 am

My case saver came off a yz250f holes matched perfect for RM250A. Just measure centre to centre and match up at your local bike shop

Title: Re: RM250 case saver
Post by: LWC82PE on November 07, 2015, 09:18:26 am

Protec used to make them in the 70's. Sometime they pop up on ebay.

Title: Re: RM250 case saver
Post by: HeavenVMX on November 07, 2015, 12:40:18 pm

Have tried Suzuki or Suzi Spares you may be surprised