OzVMX Forum

Marketplace => Wanted => Topic started by: smalls717 on October 26, 2015, 11:53:56 pm

Title: RM465 crankshaft wanted
Post by: smalls717 on October 26, 2015, 11:53:56 pm

Chasing a crankshft for a RM465.
I cant find any rod rebuild kits, or bearings,etc
Does anyone have any leads  on where parts can be sourced?
Regards Tony.

Title: Re: RM465 crankshaft wanted
Post by: mrsupersport on October 28, 2015, 08:10:37 am

I have a crank as well as two motors in pieces & a partial chassis. I am in the USA though. Shipping is NOT a problem.

Cheers, John

Title: Re: RM465 crankshaft wanted
Post by: sleepy on October 28, 2015, 10:55:20 am

There is a Maico rod that is close in dimension. Looks to be 1 mm longer and 2mm narrower at the bigend. A simple spacer under the barrel will take care of the length and an extra pair of thrust washers will fix the bigend.
PM me if you need any further info.

Title: Re: RM465 crankshaft wanted
Post by: seego on October 29, 2015, 06:13:05 pm

There is a complete NOS crankshaft for a rm465 on ebay ATM sellers name is npmoy and the ebay item number is 121792202420 it is abit pricey but they are rare now

Title: Re: RM465 crankshaft wanted
Post by: smalls717 on November 14, 2015, 01:24:17 am

Thanks for the info.
I had my eye on the new crank for a while. Was pricey, but couldnt find another, so ended up buying it.
I had my old crank with Ray Easson, but even he couldnt find the parts to refurb it.

Title: Re: RM465 crankshaft wanted
Post by: bigk on November 14, 2015, 06:17:16 am

What about a complete bike for spares? Partly dismantled but pretty much all there & not too other than a broken countershaft. Good for spares or a decent resto project.
K

Title: Re: RM465 crankshaft wanted
Post by: sleepy on November 14, 2015, 01:19:00 pm

The Maico rod option would have been under $500 with the rod supplied, spacer made and crank balanced and assembled.
Just in case you are interested I have 2 new Wiseco pistons to suit the RM465. 1 x 1.5mm over and the other 2mm over, $150 each.

Title: Re: RM465 crankshaft wanted
Post by: Oldfart on November 14, 2015, 01:57:53 pm

K    I'M interest  ....got couple of pics and a price     cheers

Title: Re: RM465 crankshaft wanted
Post by: bigk on November 14, 2015, 06:17:33 pm

Got some pics on my phone, PM your mobile number.
K

Title: Re: RM465 crankshaft wanted
Post by: Oldfart on November 14, 2015, 08:08:15 pm

sent

Title: Re: RM465 crankshaft wanted
Post by: bigk on November 14, 2015, 08:40:10 pm

Ditto.