OzVMX Forum

Marketplace => Wanted => Topic started by: Blackjack on October 21, 2015, 09:29:04 pm

Title: Keihin PWK main jets wanted
Post by: Blackjack on October 21, 2015, 09:29:04 pm
Chasing a few mains 16.5 x 6mm hex to suit Keihin carbs.
Before i jump on line and order checking to see if anyone has any laying around they are willing to part with for a reasonable price.
The sizes i am after are 150 to 170 but more specifically
152 158 162 165
Also interested in pilots 45 to 55 range.
Let me know what you got.....
Cheers
Title: Re: Keihin PWK main jets wanted
Post by: Nathan S on October 21, 2015, 09:36:48 pm
They're so cheap on eBay, that you'd be mad to get them any other way. Ten jets for $17 delivered... And yes, the quality/sizing is fine.
Title: Re: Keihin PWK main jets wanted
Post by: Blackjack on October 21, 2015, 10:15:02 pm
Cheers Nathan - For mains? Any links? I had looked on ebay and found a few for about double that still cheap but no delivery before November and i would like to get some before then.
Title: Re: Keihin PWK main jets wanted
Post by: Momus on October 21, 2015, 11:18:29 pm
Here you go: You select. He'd probably accept 15 bucks for the 10 with free postage; Nov delivery though.

http://www.ebay.com/itm/New-main-jets-for-Keihin-OKO-KOSO-PE-PWK-carburetor-carb-vergaser-choose-10-size-/221704840019?hash=item339ea36353:m:mjSQZRo40uR8vF_t_dJ9Rcg&vxp=mtr
Title: Re: Keihin PWK main jets wanted
Post by: Blackjack on October 22, 2015, 09:30:40 am
Cheers Momus - I will order some, I can wait for delivery. I have enough sizes to get by
Title: Re: Keihin PWK main jets wanted
Post by: matcho mick on October 22, 2015, 12:00:46 pm
woohoo,i'm in too,ta momus,bingo, does delorto jets too,bargain  8),(i'm always borrowing 150/155's  ::)) :P
Title: Re: Keihin PWK main jets wanted
Post by: Blackjack on October 22, 2015, 12:29:13 pm
So that went well - so now who is a good supplier for jets for the Bing carbies?
Haven't even had a look at these yet but my understanding is these are just a straight number drill sizing?
Title: Re: Keihin PWK main jets wanted
Post by: Blackjack on October 22, 2015, 02:05:45 pm
Quote from: Blackjack on October 22, 2015, 09:30:40 am
Cheers Momus - I will order some, I can wait for delivery. I have enough sizes to get by

Contacted seller and asked if I could get a mixed order of Pilot and Main jets - Response was quick and no probs getting both so I have ordered. Price was the same $17, so now just wait and see how long postage takes.
Cheers
Title: Re: Keihin PWK main jets wanted
Post by: KTM47 on October 22, 2015, 02:20:50 pm
Quote from: Blackjack on October 22, 2015, 12:29:13 pm
So that went well - so now who is a good supplier for jets for the Bing carbies?
Haven't even had a look at these yet but my understanding is these are just a straight number drill sizing?

http://www.vmx-service.eu/en/ (http://www.vmx-service.eu/en/)
Title: Re: Keihin PWK main jets wanted
Post by: Blackjack on October 22, 2015, 03:50:20 pm
Cool - Thanks for the link KTM47