OzVMX Forum

Marque Remarks => Spaniards (Bultaco, Ossa, Montesa etc) => Topic started by: mx250 on July 29, 2008, 07:22:18 pm

Title: Reed Valves and Monties.
Post by: mx250 on July 29, 2008, 07:22:18 pm

Did any Cappra or Enduro Monties have reed valves as OEM ?

Title: Re: Reed Valves and Monties.
Post by: cappra on July 29, 2008, 11:36:33 pm

The 250 H7 enduro used a reed valve setup as oem.
It was actually a KTM reed cage.

Title: Re: Reed Valves and Monties.
Post by: mx250 on July 30, 2008, 06:30:49 pm

Quote from: cappra on July 29, 2008, 11:36:33 pm

The 250 H7 enduro used a reed valve setup as oem.
It was actually a KTM reed cage.

You're a party pooper Jared. You were suppose to say that only some rare exocite works bike worth thousands of dollars had reed valves ::) :-[

Title: Re: Reed Valves and Monties.
Post by: mx250 on July 30, 2008, 06:40:51 pm

Quote from: 390 Ross on July 30, 2008, 11:34:47 am

Yes and trying to get a 38mm carby connector to suit is nigh on impossible.......... >:(

So I take it Ross that your Enduro Monty is a reed valve model and missing the carby connector  ::).