OzVMX Forum

Marque Remarks => Husqvarna => Topic started by: jerry on September 09, 2015, 01:46:43 pm

Title: 1981 XC FORK SEALS
Post by: jerry on September 09, 2015, 01:46:43 pm

Asking on behalf of a mate. 40mm dia I know but is 2 seals per side or 1. Either way does anybody know the thickness(s) and a reputable local supplier? Thanks Jerry

Title: Re: 1981 XC FORK SEALS
Post by: bigk on September 09, 2015, 03:03:21 pm

2 seals per side, any bike shop who deals with Cykel / Link can supply them. I prefer to use a slightly wider one on top.
Ariete part numbers:
53-063-00 (40 x 52 x 8/10.5)
53-033-00 (40 x 52 x 8/9.5) Link part number for this one: 33-129-31.
You will need to buy 2 sets of the narrower one (std for 40mm Husky) or 1 set of each.
Cheers,
K

Title: Re: 1981 XC FORK SEALS
Post by: jerry on September 09, 2015, 04:43:56 pm

Thanks Mick I knew you would know. Cheers Jerry

Title: Re: 1981 XC FORK SEALS
Post by: Bullet on September 09, 2015, 05:34:09 pm

I have these in stock here in Oz, they are on the website www.prime8racing.com.au

Cheers Mick