OzVMX Forum

Clubroom => General Discussion => Topic started by: Mike52 on August 07, 2015, 09:13:32 am

Title: Shocky bush suppliers ?
Post by: Mike52 on August 07, 2015, 09:13:32 am: Anyone know who does rubber shocky bushes for my PE 250c.

They look to be 24mm od , 22mm wide with a 10mm id steel tube in them.
Cheers
Mike
Title: Re: Shocky bush suppliers ?
Post by: Brian Watson on August 07, 2015, 10:50:46 am: Walter will have them.. buy from an Australian supplier..
Title: Re: Shocky bush suppliers ?
Post by: Freakshow on August 07, 2015, 02:08:41 pm: but he still gets them made overseas :)
Title: Re: Shocky bush suppliers ?
Post by: Brian Watson on August 07, 2015, 03:25:05 pm: That may be the case Kerry.. but at least some of the money spent is here in OZ.. much rather support the locals.. wouldn't you..??
Title: Re: Shocky bush suppliers ?
Post by: OverTheHill on August 07, 2015, 07:21:53 pm: How about honda rear sprocket rubber/steel bonded mounts, xr200 or just about any small honda. Just bought some from china so i'll have a measure up. Might be 9mm id not 10 but a sharp drill might fix it without unbonding. thought they were 24 od but might be wrong, could be 25. Update [30 seconds later lol] Ebayed & 24 OD--9.3 ID & 21 Wide, i'd guess the 21 is across the centre bit if it's a bit wider than outer bit where it presses in. Anyway-just an option possibly [& cheap]. Question though--did the PE's have [whatdaya call them] heim joints or uniball joints on the left to allow for misalignment due to the offset on the left for the wide QD wheel?. Sorry if i'm talking crap--i'm mostly yamaha but have an XR200 in a twin shock PE250 frame. Well. till it broke the gudgeon eye out of the rod oneday & f"£&'n totaly destroyed it [stop laughing], now it's just a smokey old 185 as a fill in. Hope that info helps but i'm real good at confusing things. Cheers.
Title: Re: Shocky bush suppliers ?
Post by: DR500 on August 07, 2015, 07:28:33 pm: http://www.hagonoz.com.au/
Title: Re: Shocky bush suppliers ?
Post by: LWC82PE on August 07, 2015, 08:00:39 pm: You might want to check the 24mm measurement. The RM/PE shocks from that era that i ahve seen had 23mm OD

Try this part for KYB/HPG Snow/ATV shocks

http://www.deycore.com/deycore-shock-parts/kyb-hpg-shock-parts/kyb-hpg-bushings/eyelet-bushing-id-395-sleeve-length-1-178-overall-length-980.html

(https://hjvw0q.bl3301.livefilestore.com/y3pCWHpSqIhG3Up0wcefgy6vjVXlZ4kOF-FFZMfHBZZKv6KpI6_zbrsLjMQfs0WOdpMs2R_eCmMOFPISpaONxNlXpivNNp855YFRfmMnFIKa3XMkF4hWfKdIcZ2pfhvmiORgDI22Sm8KwR2UflgYCNLvLLFR5K2OpmFi_0Ix6dCZWg/bushing.jpg?psid=1)

If you do need 24mm OD then you coul use this

http://www.pivotworks.com/ProductInfo.aspx?item_id=52656

10x24 spherical bearing
Title: Re: Shocky bush suppliers ?
Post by: Mike52 on August 08, 2015, 07:13:55 pm: Quote from: LWC82PE on August 07, 2015, 08:00:39 pm
You might want to check the 24mm measurement. The RM/PE shocks from that era that i ahve seen had 23mm OD

Try this part for KYB/HPG Snow/ATV shocks

http://www.deycore.com/deycore-shock-parts/kyb-hpg-shock-parts/kyb-hpg-bushings/eyelet-bushing-id-395-sleeve-length-1-178-overall-length-980.html

(https://hjvw0q.bl3301.livefilestore.com/y3pP-8nL67hUTJxBs9Rb8gDSwTfPeOg1VkyyxS_xsREJ_gtkqSqpmCI79iRkznoLD2Ko6dDszx4TU5PuUUFaCGtcJ-6FcmW3uNfr7RozWDHWMyh8PwpQPMngYzJOaYMzIqpnJipj9JgErVMJQKiSq7QQrscaabVUPHVP5YgcAZJvPI/bushing.jpg?psid=1)

If you do need 24mm OD then you coul use this

http://www.pivotworks.com/ProductInfo.aspx?item_id=52656

10x24 spherical bearing

I must have the wrong or non original shocks fitted although they look like the originals in
http://www.alpha-sports.com/suzuki_parts.htm

Mine are hourglass shaped od , rubber with no outer shell and a steel central tube
Sort of like a car shock rubber.
Cheers
Mike
Title: Re: Shocky bush suppliers ?
Post by: LWC82PE on August 08, 2015, 07:21:58 pm: All suzuki/KYB shocks have the Suzuki part number stamped on the bodies near the top. What are the part numbers on yours?