OzVMX Forum

Marque Remarks => Suzuki => Topic started by: Rossvickicampbell on July 30, 2015, 06:27:50 pm

Title: Suzuki RM370B
Post by: Rossvickicampbell on July 30, 2015, 06:27:50 pm

Gents - what volume oil for the forks - standard I think??? - on a 77 RM370B please?

ta

Rossco

Title: Re: Suzuki RM370B
Post by: davidh on July 30, 2015, 06:57:00 pm

250/370A 245 cc 250/370B 247 cc

Title: Re: Suzuki RM370B
Post by: Rossvickicampbell on July 30, 2015, 07:30:09 pm

thank you very much

Title: Re: Suzuki RM370B
Post by: Rossvickicampbell on July 30, 2015, 09:30:05 pm

David - you wouldn't also know the gearbox oil capacity required for just a change would you?  Ie not split the cases etc?

ta

Rossco

Title: Re: Suzuki RM370B
Post by: davidh on July 30, 2015, 10:50:40 pm

The 370 takes 1000 for a change and 1100 from dry .

Title: Re: Suzuki RM370B
Post by: Rossvickicampbell on July 31, 2015, 10:33:22 am

thank you  ;D

Title: Re: Suzuki RM370B
Post by: Rossvickicampbell on August 01, 2015, 04:52:25 pm

next question - as doing a tidy up on this RM.

In pulling bits and pieces off the bike for some minor resto and repair work I have found it appears the kill switch is not connected although the two wires are "end" loose under the tank.  It doesn't appear there is anywhere the wires have pulled from as there is only one connector not hooked up underneath?  Any suggestions?  I did a check on spark and still have spark so wondering whether it has been connected at all as I know some guys do or do the 2 wires feed into the one connector?  Bit ambiguous questioning I know!

cheers

Rossco

Title: Re: Suzuki RM370B
Post by: smed on August 01, 2015, 05:07:49 pm

Earth wire onto coil mount or frame Rosco?

Title: Re: Suzuki RM370B
Post by: Rossvickicampbell on August 01, 2015, 05:12:01 pm

doesn't look like it.  Bit grubby underneath so hard to see if they have pulled from anywhere but doubtful.  But will have another look.

Title: Re: Suzuki RM370B
Post by: Tossa on August 01, 2015, 05:34:35 pm

nana nap please Rossco, or I'll tell Vicki!!!!

Title: Re: Suzuki RM370B
Post by: Rossvickicampbell on August 01, 2015, 05:40:33 pm

Vicki isn't here - that's why I am on the bike.  Front end finished Baz.

Title: Re: Suzuki RM370B
Post by: Tossa on August 01, 2015, 08:36:44 pm

behave yourself we have 5 weeks!!

Title: Re: Suzuki RM370B
Post by: FourstrokeForever on August 02, 2015, 08:59:36 am

Rosco, 1 wire should be earthed to metal and the other wire to coil (there should be a wire from coil to connect to)

Title: Re: Suzuki RM370B
Post by: bigk on August 02, 2015, 09:41:10 am

RM 370 has a one wire kill switch (round metal with red button) as standard, goes to the coil. You must have an after market one on your bike. You can buy reproduction original style switches from any bike shop.
K

Title: Re: Suzuki RM370B
Post by: Rossvickicampbell on August 02, 2015, 12:40:07 pm

thanks guys - yes K saw that when I went looking and therefore can't see where these wires have "pulled" from which makes me wonder if they were ever hooked up.  Shall have a play and if does not work with earthing and connecting will try and get a 1 wire one.

thanks

Rossco

Title: Re: Suzuki RM370B
Post by: suzuki59 on August 02, 2015, 06:07:07 pm

Jeez Rosco sort it out !!  ;)

Title: Re: Suzuki RM370B
Post by: Rossvickicampbell on August 07, 2015, 01:29:37 pm

getting there Craigy - it is unfortunate when heathens like yourself get a go at things in the first place.

Want to come over and help  :D