OzVMX Forum

Marketplace => Wanted => Topic started by: hampster on July 06, 2015, 11:30:23 am

Title: Xl 350 swing arm.
Post by: hampster on July 06, 2015, 11:30:23 am

Hi All,

Trying to get hold of a xl 350 swing arm early k1.

Thanks Chris.

Title: Re: Xl 350 swing arm.
Post by: bruce g on July 11, 2015, 07:28:27 pm

have a xl 250 swing not sure if they are the same
cheers
Bruce

Title: Re: Xl 350 swing arm.
Post by: jimson on July 11, 2015, 08:50:08 pm

I think late 60s early 70s CB350 road bike have virtually the same swing arm. Jimson

Title: Re: Xl 350 swing arm.
Post by: LWC82PE on July 11, 2015, 09:05:22 pm

If you need pre 75 legality, then you will need the one off the 74 model which has no pillion peg mounts and has a large round circle cut out just in front of the lower shock mount. 75 model does no have the hole. I have been trying to find one for a few years but they are really hard to find.

Title: Re: Xl 350 swing arm.
Post by: MX? on July 11, 2015, 10:39:24 pm

XL250 in front, 350 on bike  ;D

(http://i32.photobucket.com/albums/d14/photos2u/XL250/250%20and%20350%20swingarm%20differences_zpsdzinwjzj.jpg)

Title: Re: Xl 350 swing arm.
Post by: hampster on July 14, 2015, 10:23:19 am

Hi all,

Thanks for the reply have got one from the states after searching oz.
A 74 350 with the cut out $95 landed.

Thanks Chris.