OzVMX Forum

Marque Remarks => Suzuki => Topic started by: BAHNZY on July 24, 2008, 12:31:25 am

Title: 1980 PE250 Fork Servicing
Post by: BAHNZY on July 24, 2008, 12:31:25 am

In preperation for the Vinduro, i thought i'd better service the forks on the 80 PE250.
Does anyone have handy the fork oil level & cc quantiy and the suggested psi for a 105 kg rider?
Got plenty of specs for the RM but not the PE.

Thanks, Bahnsy.

Title: Re: 1980 PE250 Fork Servicing
Post by: bigk on July 24, 2008, 09:44:43 am

Fast facts book states 308cc of 5W/20 oil no psi though. I run 15PSI of nitrogen in my Fox forks, so I would imagine somewhere between 5-15PSI would suit. Use a heavier oil if you want to slow the rebound down a little.
Cheers,
K

Title: Re: 1980 PE250 Fork Servicing
Post by: Doc on July 24, 2008, 11:30:32 am

Extract from Clymer service manual

Title: Re: 1980 PE250 Fork Servicing
Post by: lukeb1961 on July 24, 2008, 05:56:20 pm

grab the Owners Manual here:
http://cid-407d7ef0965d3991.skydrive.live.com/browse.aspx/Pure%20Enduro/PE250T