OzVMX Forum

Marketplace => Wanted => Topic started by: Rodsmetal on April 20, 2015, 05:42:05 pm

Title: XL 350 center port gearbox
Post by: Rodsmetal on April 20, 2015, 05:42:05 pm

Hi All
I have a older 350  side port engine with a 420 kit  hi comp  , slips out in 5th gear ,was told the  center port engine had a better/upgrade gearbox .
Or some advice knowledge  on the known problem, bevel cut gear  dogs?  etc .

cheers
Rod

Title: Re: XL 350 center port gearbox
Post by: FourstrokeForever on April 20, 2015, 10:29:03 pm

Back cut the problem dogs on 5th and 3rd gears. Also, speed up the clutch gears. Make sure you run a cush drive rear hub.