OzVMX Forum

Marketplace => Wanted => Topic started by: FourstrokeForever on April 20, 2015, 12:56:28 pm

Title: Wanted....'77 RM250 or 370 forks
Post by: FourstrokeForever on April 20, 2015, 12:56:28 pm

As title suggests with clamps preferred. Cheers

Title: Re: Wanted....'77 RM250 or 370 forks
Post by: mrsupersport on April 22, 2015, 12:57:12 am

I have a pair if you'd be interested in shipping from states. John [email protected]

Title: Re: Wanted....'77 RM250 or 370 forks
Post by: FourstrokeForever on May 14, 2015, 09:03:38 am

still looking......

Title: Re: Wanted....'77 RM250 or 370 forks
Post by: mrsupersport on May 18, 2015, 02:10:49 pm

Still have a pair but, am in USA. John [email protected]

Title: Re: Wanted....'77 RM250 or 370 forks
Post by: Husabergpete on June 09, 2015, 08:57:28 pm

Mate I have a pair of good lower fork legs off an RM 370. think they are B model ones as I had an A.

All the best

Pete
Wollongong

Title: Re: Wanted....'77 RM250 or 370 forks
Post by: bigk on June 10, 2015, 07:22:32 am

Hey Mark, I found a set of forks amongst the pile of Suzuki stuff if you still need them. I'll go looking for clamps when I get a chance.
K

Title: Re: Wanted....'77 RM250 or 370 forks
Post by: FourstrokeForever on June 10, 2015, 09:22:45 am

That would be great if you can find the clamps as well Mick.

Cheers

Title: Re: Wanted....'77 RM250 or 370 forks
Post by: SimonC on June 11, 2015, 12:27:44 am

I may have a set of clamps, they are certainly early RM, but not sure if 125 or 250/370. Can send a pic if you like.

Cheers

Simon

Title: Re: Wanted....'77 RM250 or 370 forks
Post by: FourstrokeForever on June 11, 2015, 09:05:08 am

Quote from: SimonC on June 11, 2015, 12:27:44 am

I may have a set of clamps, they are certainly early RM, but not sure if 125 or 250/370. Can send a pic if you like.

Cheers

Simon

Thanks Simon. I'm not sure if the 125 is the same as 250/370. Maybe some of the Suzuki gurus can tell us if they read this.

Title: Re: Wanted....'77 RM250 or 370 forks
Post by: bigk on June 11, 2015, 12:58:21 pm

I have clamps as follows:
2 x sets of RM250 A/B which have had the molded clamps machined off & have bolt on lay back bar mounts.
1 x set RM 125N clamps (the forks fit).
2 x sets of RM 125A
1 x set RM250B which have been bored to take 38mm forks.
There are others as well but I got sick of looking.
So there will be something to suit for sure Mark. Are you fitting them to a farm bike or PIL?
K

Title: Re: Wanted....'77 RM250 or 370 forks
Post by: FourstrokeForever on June 12, 2015, 11:46:13 am

Some might say I'm putting them on a PIL Mick. I'm hoping to build a better handling version of a 1976 Honda CR250......Just for the sake of building something different and the Suzuki geometry was the go back in the day. It will be similar to the CR I sold you a while back.

I'd prefer clamps that are not swept back and are Pre78 legal. As you might guess, I need plenty of room for my girth......And long arms  ::)

I appreciate any advice and help you can offer Mick. If you reckon we can sort something from the piles of overstock parts you have, I can come over for a squiz one day next week if that suits you?

Cheers
Mark

Title: Re: Wanted....'77 RM250 or 370 forks
Post by: LWC82PE on June 12, 2015, 12:44:43 pm

76/77 250/370 have a 35mm top triple clamp. 77 125 is 36mm top and bottom.

Title: Re: Wanted....'77 RM250 or 370 forks
Post by: bigk on June 12, 2015, 02:36:33 pm

No problems Mark, just give me some notice to make sure I'm here.
Cheers,
K

Title: Re: Wanted....'77 RM250 or 370 forks
Post by: FourstrokeForever on June 13, 2015, 08:15:20 am

Thanks for the heads up LWC.

I'll be in touch Mick once I know what work days I have next week.