OzVMX Forum

Clubroom => Tech Talk => Topic started by: bigtoe on March 03, 2015, 06:47:55 pm

Title: RM 125A
Post by: bigtoe on March 03, 2015, 06:47:55 pm

Hi, my sons rm125a needs rebuilding, could anyone tell us the best place to get crank bearing and seal kits, con rod bearings, probably piston and rings, we are on the gold coast, thanks

Title: Re: RM 125A
Post by: Ted on March 03, 2015, 06:49:56 pm

Speak to Davey Crocket on here. He has one and will no doubt either have the bits or know where you should get them from

Title: Re: RM 125A
Post by: bigtoe on March 03, 2015, 07:27:13 pm

Thanks ted, ok davey crocket guru of all things rm125 where are you?

Title: Re: RM 125A
Post by: JohnnyO on March 03, 2015, 10:33:00 pm

Serco in Brisbane sell all those items and also rebuild cranks and do re bores if needed

Title: Re: RM 125A
Post by: sleepy on March 03, 2015, 11:37:44 pm

Just had a flick through Serco's and some other listings and there isn't much available aftermarket for your A model. There are other model RM bit that can be made to fit, PM me if you want any further help.

Title: Re: RM 125A
Post by: bigk on March 04, 2015, 07:18:09 am

TS 125 piston is the common replacement, but you can use an Elsinore piston which has a higher dome for more compression if you want to, but will need to use a different rod to accommodate the small end size. It's a bit of mucking around & you'll have to use high quality fuel if you go down that path. I have a genuine NOS RM125A rod kit if you're interested.
Cheers,
K