OzVMX Forum

Marketplace => Wanted => Topic started by: John Orchard on February 23, 2015, 05:27:46 pm

Title: WTB- 18" 36 hole, alloy rim, Honda spoke 167mm & 36 x 4mm alloy nipples.
Post by: John Orchard on February 23, 2015, 05:27:46 pm

Chasing an alloy rim, silver, 36 hole in either 2.15 or 2.50 width.

Chasing a set of 36, 4mm alloy spoke nipples.

Chasing one RH spoke to suit '86 CR250/500, 4mm, straight-pull, 167mm long.

What may you have?

Title: Re: WTB- 18" 36 hole, alloy rim, Honda spoke 167mm & 36 x 4mm alloy nipples.
Post by: LWC82PE on February 23, 2015, 05:51:57 pm

Spoke nipples are here

http://www.smprowheels.co.uk/nipple-sets/alloy-nipple-sets.html

Rim request is a bit too broad. Is it for disc, drum, even/un-even flange size? You can't use any 36 hole rim with any 36 hole hub. Theres different angles and cross patterns

Title: Re: WTB- 18" 36 hole, alloy rim, Honda spoke 167mm & 36 x 4mm alloy nipples.
Post by: John Orchard on February 23, 2015, 08:13:35 pm

Thanks to Momus for the stuff.

Title: Re: WTB- 18" 36 hole, alloy rim, Honda spoke 167mm & 36 x 4mm alloy nipples.
Post by: Paul552 on February 23, 2015, 08:38:33 pm

I have stock front and rear off a 84 cr250 re but they were powder coated.
Not sure if you are looking for perfect ones or just rims  ;D