OzVMX Forum

Marketplace => Wanted => Topic started by: g465b on February 17, 2015, 06:40:14 pm

Title: MUGEN 360 PISTON AND CR250RZ kickstart assembly
Post by: g465b on February 17, 2015, 06:40:14 pm

hi , chasing a piston/rings to fit 83.5mm bore of a NOS 360 Mugen barrell, any brand-even if it needs machining/modifying. also a
complete kickstart assembly to fit the 78/79 Cr250 honda ,shaft,gear,ratchet thing and spring and lever .  thanks g.

Title: Re: MUGEN 360 PISTON AND CR250RZ kickstart assembly
Post by: bigk on February 17, 2015, 07:26:51 pm

You can use a Montesa 360 piston with minor (easy ) mods. Might be easier to locate. One piston maker in Melbourne has the specs and has made Mugen pistons in the past.
K

Title: Re: MUGEN 360 PISTON AND CR250RZ kickstart assembly
Post by: g465b on February 17, 2015, 07:37:30 pm

thanks K pm sent

Title: Re: MUGEN 360 PISTON AND CR250RZ kickstart assembly
Post by: Rossvickicampbell on February 17, 2015, 07:58:13 pm

small help - but expensive - check out Phil Denton Engineering in the UK for kickstarter levers - have the re mortgage ready.

Title: Re: MUGEN 360 PISTON AND CR250RZ kickstart assembly
Post by: JohnnyO on February 17, 2015, 09:39:19 pm

Rick Horvat in the US has 360 Mugen pistons

Title: Re: MUGEN 360 PISTON AND CR250RZ kickstart assembly
Post by: g465b on February 17, 2015, 09:43:42 pm

thanks ross,john and rodger.   cheers Grant