OzVMX Forum

Clubroom => Tech Talk => Topic started by: MaxPower on February 17, 2015, 11:13:50 am

Title: aftermarket CDI
Post by: MaxPower on February 17, 2015, 11:13:50 am

http://www.demonmx.co.uk/contents/en-uk/d600.html

I am looking to install this on my 83 kx125.  Has anyone had any experience with these CDIs? I asked on a UK mx board since they are made in England but no response.  My bike runs great now and would hate to cause problems which seems to be a pattern for me.
Being able to choose from 6 maps sounds great as long as they dont burn a hole through my new piston. Or worse, do it at a race.
Im leaning towards PVL since i have not heard of anyone that didnt like it. With 6 maps id be able to ride trials, mx, commute to work and road race all with the same bike!

Title: Re: aftermarket CDI
Post by: tony27 on February 17, 2015, 11:36:30 am

Had a look at a few different things & the part numbers match up to electrexworld part numbers so I'd say they are an on-seller of their parts, you can buy electrexworld stuff direct

Title: Re: aftermarket CDI
Post by: KTM47 on February 17, 2015, 03:32:47 pm

Horse Power Ignitions in Belgium make ignitions for almost everything.  HPI

Title: Re: aftermarket CDI
Post by: tony27 on February 17, 2015, 04:09:21 pm

HPI sells a lot of electrexworld stuff, compare part numbers & look on electrexworld's site to see that HPI is their Belgian agent

Title: Re: aftermarket CDI
Post by: bazza on February 17, 2015, 07:48:19 pm

Have electrixworld on my bsa ,relaible as so far