OzVMX Forum

Marketplace => Wanted => Topic started by: YZ250H on January 30, 2015, 08:39:56 am

Title: TY 250ABCD / 175BCD Front Backing plate
Post by: YZ250H on January 30, 2015, 08:39:56 am

Has Speedo drive slot which I intend to use.  The old one has totally disintegrated.

I still have all the speedo workings, so the plate by itself is OK.

Thanks in advance for any help.

Title: Re: TY 250A Front Backing plate
Post by: tony27 on January 30, 2015, 09:00:06 am

Pretty certain they didn't change over the different models, 175 are the same

Title: Re: TY 250A Front Backing plate
Post by: YZ250H on January 30, 2015, 11:55:40 am

Thanks Tony,

That gives me a few more options

Title: Re: TY 250A Front Backing plate
Post by: Simo63 on January 30, 2015, 12:30:39 pm

Would a DT one fit?

Title: Re: TY 250ABCD / 175BCD Front Backing plate
Post by: YZ250H on January 30, 2015, 01:14:13 pm

Not sure Simo. 

Part number is 434-25121-02-00.  DT250 A is different part number.
TY 175B and 250B is 434-25121-02-00 also as Tony said.
So is 175C and 250C
So is 175D and 250D

NWVCP seem to lose interest in TY's after that  :o :o

Title: Re: TY 250ABCD / 175BCD Front Backing plate
Post by: Davey Crocket on January 30, 2015, 01:36:49 pm

I'll have one for sure......have 4 TY175's to wreck.

Title: Re: TY 250ABCD / 175BCD Front Backing plate
Post by: David Lahey on January 30, 2015, 03:23:06 pm

Even the TY175JC backing plate will fit, and is the same as the TY250A apart from a hole they have to allow the thickness of the brake lining material to be inspected without pulling the wheel out.

Title: Re: TY 250ABCD / 175BCD Front Backing plate
Post by: YZ250H on January 30, 2015, 04:22:08 pm

Quote from: Davey Crocket on January 30, 2015, 01:36:49 pm

I'll have one for sure......have 4 TY175's to wreck.

Pick out a nice one for me John  ;)

Let me check what else I need too.  I migh have a list of things  :o

Title: Re: TY 250ABCD / 175BCD Front Backing plate
Post by: Freakshow on February 02, 2015, 03:52:52 pm

do you have any front or rear guards for me ? air filter i can wash ...... rear wheel.  what else do i need

Title: Re: TY 250ABCD / 175BCD Front Backing plate
Post by: Davey Crocket on February 02, 2015, 05:12:44 pm

New guards are cheap out of the UK Freaky, Yamaha still sell new air filters, I'll have a rear wheel.....send me your lists Fellas.

Title: Re: TY 250ABCD / 175BCD Front Backing plate
Post by: David Lahey on February 02, 2015, 07:55:26 pm

Quote from: Davey Crocket on February 02, 2015, 05:12:44 pm

New guards are cheap out of the UK Freaky, Yamaha still sell new air filters, I'll have a rear wheel.....send me your lists Fellas.

There are a few brands of aftermarket air filters for them available, and all are longer-lasting than the genuine Yamaha filter
DC plastics make semi-replica plastic guards that are very light and look almost right and you can also get very good plastic replica rear guards

This rear guard for TY250 is made to fit all twinshock model TY250s. For A and B models you cut the front off it
http://www.inmotiontrials.com/product/ty-250-rear-mudguard-white/

http://www.tytrials.co.uk/trailandtrialsuk/prod_2772469-14-Air-Filter-TY250-Twinshock.html

Title: Re: TY 250ABCD / 175BCD Front Backing plate
Post by: YZ250H on February 05, 2015, 09:55:00 am

List PM'd to you John  8)