OzVMX Forum

Marketplace => For Sale => Topic started by: mainline on January 14, 2015, 08:10:59 pm

Title: ts250 forks
Post by: mainline on January 14, 2015, 08:10:59 pm
36mm excellent chrome, anodising on the sliders isn't the best but would clean up. I think they're late 70's early 80's vintage.

$80
Title: Re: ts250 forks
Post by: Ted on January 14, 2015, 08:29:02 pm
Late 70's early 80's would make them Evo. Get with the times. 48mm USD fork are all the rage.
Title: Re: ts250 forks
Post by: LWC82PE on January 14, 2015, 09:18:31 pm
For 36mm TS 250 79-82 they would need to be 811-815mm long from axle hole to top of chrome. 78-79 SP370 are very similar, if not the same but I am not sure on the length of those. Also 80-84 DR/SP400/500S are also very similar at first glance but are 836mm long although 82-84 have air caps. I am considering a 811mm TS250 set as I would like some fork legs with good chrome, so I am considering them if they are the 811mm long type.
Title: Re: ts250 forks
Post by: mainline on January 14, 2015, 10:05:44 pm
For 36mm TS 250 79-82 they would need to be 811mm long from axle hole to top of chrome. 78-79 SP370 are very similar, if not the same but I am not sure on the length of those. Also 80-84 DR/SP400/500S are also very similar at first glance but are 836mm long. I am considering a 811mm TS250 set as I would like some fork legs with good chrome, so I am considering them if they are the 811mm long type.

I'll measure them and let you know