OzVMX Forum

Marketplace => For Sale => Topic started by: Simo63 on November 18, 2014, 09:26:08 am

Title: 1989 Honda CR125 Bottom End. Dismantled, cases hydroblasted, gears RS
Post by: Simo63 on November 18, 2014, 09:26:08 am

Hey all. I've got the bottom end of a 1989 CR125 Motor to sell.

These parts are left overs from a project bike that were never used however they have been hydroblasted.

Complete with ignition.

From what I understand, the gears are very worn and I am uncertain if they are useable or not.

Anyway, if you need any parts or want to buy the whole bottom end let me know.

Located on the Sunshine Coast, QLD. Can post parts

Cheers
Simo

Title: Re: 1989 Honda CR125 Bottom End. Dismantled, cases hydroblasted, gears RS
Post by: 2stroksmoka on November 18, 2014, 06:46:42 pm

I am chasing the arm that goes up to the power valve if you have one? My has been snapped and welded. I am on the sunny coast also

Title: Re: 1989 Honda CR125 Bottom End. Dismantled, cases hydroblasted, gears RS
Post by: Simo63 on November 18, 2014, 09:52:25 pm

Quote from: 2stroksmoka on November 18, 2014, 06:46:42 pm

I am chasing the arm that goes up to the power valve if you have one? My has been snapped and welded. I am on the sunny coast also

I'm not sure mate, will have to check. I recall a mate said the power valve stuff was missing so it's likely it's broken as well and been disgarded??  I'll have a look and let you know.

Title: Re: 1989 Honda CR125 Bottom End. Dismantled, cases hydroblasted, gears RS
Post by: foxy999 on November 21, 2014, 04:07:02 pm

ifs its my old one nothing was any good, power value parts missing and been welded before.

Title: Re: 1989 Honda CR125 Bottom End. Dismantled, cases hydroblasted, gears RS
Post by: Simo63 on November 21, 2014, 11:40:55 pm

Quote from: foxy999 on November 21, 2014, 04:07:02 pm

ifs its my old one nothing was any good, power value parts missing and been welded before.

Yeah it's the bottom end off the old CR we used to own. I thought you said the power valve stuff was missing or damaged. 

Title: Re: 1989 Honda CR125 Bottom End. Dismantled, cases hydroblasted, gears RS
Post by: jamie ashcroft on November 22, 2014, 01:52:25 pm

hey simo you wouldnt have the cluth/waterpump case on that bottom end would you

Title: Re: 1989 Honda CR125 Bottom End. Dismantled, cases hydroblasted, gears RS
Post by: Simo63 on November 23, 2014, 05:21:15 pm

Quote from: jamie ashcroft on November 22, 2014, 01:52:25 pm

hey simo you wouldnt have the cluth/waterpump case on that bottom end would you

I think it's there but unsure as to condition. I can have a look, take some pics and you can decide?  Send me your email address or mobile phone number and I'll send some pics

Title: Re: 1989 Honda CR125 Bottom End. Dismantled, cases hydroblasted, gears RS
Post by: 80-85 husky on November 23, 2014, 09:00:02 pm

kdx175 is making new ones I think???