OzVMX Forum

Marketplace => For Sale => Topic started by: Nathan S on October 23, 2014, 07:40:48 pm

Title: 85 XR250 frame, swingarm, rear wheel, etc.
Post by: Nathan S on October 23, 2014, 07:40:48 pm

Frame in good condition. Dent free lower rails. Has compliance plate, dated late 84.
Swingarm in good nick. No play in bearings.
Tank has been very roughly sanded back, should clean up fine. Inc cap and tap.
side stand.
Rear wheel, has one big corrosion patch on rim. Some cosmetic rust on some spokes. Wheel otherwise seems goof. Tyre very sad (about 15% tread left). Good bearings, 35T sprocket, brake plate included.
Brake pedal straight.
LHS footpeg.
Original handlebars, slightly tweaked but could be straightened for a resto bike.
Triple clamps in VGC.

$80/lot? Will seperate.

Currently located in Canberra, will be in Yass early next week.

Photos later.

Title: Re: 85 XR250 frame, swingarm, rear wheel, etc.
Post by: DIRTPILOT72 on October 25, 2014, 12:38:10 pm

Intersted in the frame and sidestand.

Title: Re: 85 XR250 frame, swingarm, rear wheel, etc.
Post by: shelpi on October 25, 2014, 01:06:21 pm

has it got the front brake assembly? master and caliper ;)

Title: Re: 85 XR250 frame, swingarm, rear wheel, etc.
Post by: Nathan S on October 25, 2014, 07:21:07 pm

Quote from: shelpi on October 25, 2014, 01:06:21 pm

has it got the front brake assembly? master and caliper ;)

Nope - I bought it for the forks/wheel/front brake.

DP, PM replied.

Title: Re: 85 XR250 frame, swingarm, rear wheel, etc.
Post by: Fenno on October 26, 2014, 09:25:43 pm

i got a master and caliper

Title: Re: 85 XR250 frame, swingarm, rear wheel, etc.
Post by: shelpi on October 27, 2014, 10:41:37 am

Quote from: Fenno on October 26, 2014, 09:25:43 pm

i got a master and caliper

yep interested, cheers

Title: Re: 85 XR250 frame, swingarm, rear wheel, etc.
Post by: Fenno on October 27, 2014, 11:46:21 am

PM sent shelpi

Nath what are you building ?
Thought you were all green

Title: Re: 85 XR250 frame, swingarm, rear wheel, etc.
Post by: Nathan S on October 27, 2014, 03:48:15 pm

Nah, I'm a bike tart.
This is about making the 83 RM125 stop. Hoping like hell that I can get at least 11" of travel out of the XR forks...

Title: Re: 85 XR250 frame, swingarm, rear wheel, etc.
Post by: SimonC on October 27, 2014, 05:31:11 pm

I have an 85 seat if anybody needs one.