OzVMX Forum

Clubroom => Tech Talk => Topic started by: jimg1au on October 09, 2014, 08:00:21 pm

Title: regassing works performence shocks in sydney south west
Post by: jimg1au on October 09, 2014, 08:00:21 pm

need a set of works shocks regassed where is a place to get them done
thanks
jim
454

Title: Re: regassing works performence shocks in sydney south west
Post by: PCMAX on October 17, 2014, 02:43:25 pm

Shocktreatment out near Wallacia will be able to do it for you.

http://www.shocktreatment.com.au/contactus.html

Title: Re: regassing works performence shocks in sydney south west
Post by: Nathan S on October 17, 2014, 04:17:24 pm

Any half-way competent bike shop will have the gear.

Title: Re: regassing works performence shocks in sydney south west
Post by: flattracker on October 18, 2014, 12:20:43 am

do they have a valve for regas or not? if they have a valve you can use a shock pump from a mountain bike to do the job. If not they need to be regased in a chamber. The shock is placed into a chamber and this is then pressurized to force gas past the seal into the shock.
Nitrogen is generally used because it is a completely "clean" gas.

Title: Re: regassing works performence shocks in sydney south west
Post by: Kenneth S (222) on October 18, 2014, 06:05:37 am

Sean at SOS Suspension is very helpful and likes working on Vintage. Shock Treatment sent me to him when I had to get my Works Performance shocks serviced.

https://plus.google.com/114803561236170675981/about?gl=au&hl=en

Title: Re: regassing works performence shocks in sydney south west
Post by: jimg1au on October 18, 2014, 07:51:16 am

thanks for the replies and yes they have a valve
me and firko reoiled and resealed these a while ago just didn't have a use for them till now
jim

Title: Re: regassing works performence shocks in sydney south west
Post by: Paul552 on October 18, 2014, 08:24:47 am

Rosco at MCD

Walking encyclopedea on motocross and good guy to boot.

He is at Penrith