OzVMX Forum

Marque Remarks => Honda => Topic started by: bazza on September 22, 2014, 08:23:14 pm

Title: Honda CR250 1976
Post by: bazza on September 22, 2014, 08:23:14 pm: Does any one know a wide foot peg that will fit these bikes?

Thanks
Title: Re: Honda CR250 1976
Post by: bazza on September 22, 2014, 10:29:32 pm: Does any one have standard front and rear sprocket size?
Std Main jet and pilot jet size?
Thanks
Title: Re: Honda CR250 1976
Post by: g465b on September 23, 2014, 10:23:10 am: hi, 14/47 and #155 main, #55 pilot. cheers G.
Title: Re: Honda CR250 1976
Post by: FourstrokeForever on September 23, 2014, 11:10:53 am: Quote from: bazza on September 22, 2014, 08:23:14 pm
Does any one know a wide foot peg that will fit these bikes?

Thanks

Early YZ/WR Yamaha fourstoke pegs fit with a bit of grinding work. I had 2004 WR footpegs on my '74 elsinore.
Title: Re: Honda CR250 1976
Post by: bigk on September 23, 2014, 12:29:21 pm: I have plenty of engine spares for one of those, (probably a complete engine in parts). Was keeping them for prosperity, but that day is long past. Available to anyone interested.
Cheers,
K
Title: Re: Honda CR250 1976
Post by: davidsonclan5 on September 23, 2014, 05:02:10 pm: Big K I'm interested in the engine parts and a big thanks for assisting with that frame.
Rob
Title: Re: Honda CR250 1976
Post by: bazza on September 23, 2014, 05:32:47 pm: Need rear wheel and hub , also 1 x front fork chrome To get started, looking for right chrome before go XL forks way only if I have to
Thanks again.
Title: Re: Honda CR250 1976 rear wheel help
Post by: bazza on September 24, 2014, 02:00:51 pm: have found cheap NOS fork leg=1 problem solved

Does any one know if MR250 rear wheel same as CR for 1976? look the same,not sure of offset?
Thanks
Title: Re: Honda CR250 1976 rear wheel help
Post by: FourstrokeForever on September 24, 2014, 07:38:13 pm: Quote from: bazza on September 24, 2014, 02:00:51 pm
have found cheap NOS fork leg=1 problem solved

Does any one know if MR250 rear wheel same as CR for 1976? look the same,not sure of offset?
Thanks

MR250 is a cush drive hub.....probably a good choice for keeping the gearbox alive even if it is a bit heavier. Offset may be slightly different
( I don't think it is) BUT it wouldn't be that much different. At the end of the day, the same spokes will be used.
Title: Re: Honda CR250 1976
Post by: jimg1au on September 24, 2014, 08:34:46 pm: the mr is a solid hub no cush drive mt has the cush drive.i owned one but sold it to matcho mick.
mr250 rear hub part no
42601-357-030

HUB, RR. WHEEL (NOT AVAILABLE)

1976 cr250 rear hub part no

42601-357-030

HUB, RR. WHEEL (NOT AVAILABLE)

lots of cr250 parts fit mr250
gearbox the same but different ratios
best honda parts on web
http://www.westernhillshondayamaha.com/index.htm
cheers
jim
Title: Re: Honda CR250 1976
Post by: FourstrokeForever on September 24, 2014, 08:47:34 pm: I stand corrected Jim........so offset should be pretty much exactly the same
Title: Re: Honda CR250 1976
Post by: johnmcc on September 25, 2014, 11:08:24 pm: I thought VMX Racing listed wide pegs for the 76 CR250 ?
Title: Re: Honda CR250 1976
Post by: jimg1au on September 26, 2014, 06:57:12 am: I just use xl250 pegs not wider but longer
jim
Title: Re: Honda CR250 1976
Post by: bazza on September 26, 2014, 02:55:25 pm: Johnmcc they do but out of stock
Title: Re: Honda CR250 1976
Post by: micks on September 26, 2014, 06:01:10 pm: remember elsie 125 saying that Honda cfr230 pegs may fit and where $60 the pair. check it may help
Title: Re: Honda CR250 1976
Post by: bazza on September 26, 2014, 07:34:36 pm: Thanks Miicks will go check the daughter and laws bike CRF230 next week
Title: Re: Honda CR250 1976
Post by: bazza on October 01, 2014, 10:40:54 am: Mick your right CRF230 foot pegs slot in
Title: Re: Honda CR250 1976
Post by: tony27 on October 01, 2014, 10:57:01 am: Has she worked out what's missing off the crf yet Mike?
Title: Re: Honda CR250 1976
Post by: bazza on October 01, 2014, 04:49:16 pm: No but Sunday taking modern bikes to Woodhill forrest, may have to put them back on the CRF for the day....LOL