OzVMX Forum

Marketplace => For Sale => Topic started by: Nathan S on July 05, 2008, 10:48:23 pm

Title: IT250/465/490 parts clear-out.
Post by: Nathan S on July 05, 2008, 10:48:23 pm

No 465/490 engine stuff!


H/J bits:

250J Frame - blasted and repainted (not a pro job, but better than the crusty 26yo paint!).
465H frame (has had rear loop cut off, needs some lovin').
Swing arms (1x 465H and 1x 250J).
Good 250 shock, unknown 465 shock.
38mm forks and triples from 465 (good chrome, IIRC).
Front wheel with OK knobby tyre.
465 rear wheel with crappy tyre.
250 rear wheel with rooted rim (good hub).
Seat (needs cover, but good base and foam).
465 tank (split on top... probably repairable).
Steel handlebars.
R brake plates (and 'ugly but functional' repaired front SLS brake plates).
Foot pegs with mounts.
Both axles.
Airbox.
Headlight (rough surround, but should scrape up OK).
Guards (rough).

Wow, I've just managed to make it all sound like a pile of shit...  :-[ Really, there's the making of a decent bike in there - just add a complete engine and side covers.

$250 for the lot.
Will seperate if there's no serious interest in the next few days (NB: Stuff like the 465 frame and tank are freebies - don't think that they're inflating the total price at all!).

K/L bits:
Heat damaged side cover from a IT250/490K+ (I forget which side... the exhaust side). $0
250K barrel with the skirt broken off. $0.
250K pipe (rough repair to header, but functional) $10.
250K shock (seems good). $50.
K+ seat - OK base, apparently OK foam. $10 if I haven't already given it to Hilly...
43mm forks and maybe triples (need to check on these).
TLS front brake plate. $45.

Bits are in Yass, NSW.
Postage no drama for the smaller bits. I can pack stuff up for a courier for the larger bits.
Can possibly deliver to Melb/Sydney/Vinduro for a contribution to fuel costs.

04000 23847.

Title: Re: IT250/465/490 parts clear-out.
Post by: yzhilly on July 06, 2008, 07:56:44 pm

 Hey Nathan we are all square if anything you have a bit of credit . I could use all those IT bits and i wouldnt mind the Kato too but i will leave them for someone with a bigger shed coz mines full , have you started on the Young Fellas PeeWee Yet ???.

Title: Re: IT250/465/490 parts clear-out.
Post by: Nathan S on July 06, 2008, 08:20:58 pm

 :D

I've got most of a PW here for him (thanks to YZ360A), but it might a while off yet... like 18 months....  ;)

The stuff can stay here for a while... I'm mostly chasing the cash!  ;D

Title: Re: IT250/465/490 parts clear-out.
Post by: yzhilly on July 06, 2008, 08:49:46 pm

Thats my problem too i can get around the shed bit ,just got no cash ATM.

Title: Re: IT250/465/490 parts clear-out.
Post by: yz490rules on September 28, 2009, 02:19:42 pm

Hi,

Do you still have the 465 rear wheel with crappy tyre?


Stephen

Title: Re: IT250/465/490 parts clear-out.
Post by: TwoTees on September 28, 2009, 03:11:18 pm

Nathan
Im keen on the "TLS front brake plate. $45."
Is it for IT + YZ H or  YZ J
Alloy or steel arms?
Chris

Title: Re: IT250/465/490 parts clear-out.
Post by: AdamN on September 28, 2009, 08:33:34 pm

Hi Nathan,
what 465 parts do you have left?

Cheers
Adam

Title: Re: IT250/465/490 parts clear-out.
Post by: frostype400 on September 28, 2009, 08:43:08 pm

Hey Nathan got any suzuki parts thanks Michael. :)

Title: Re: IT250/465/490 parts clear-out.
Post by: FourstrokeForever on October 14, 2009, 08:58:05 pm

Hey Micheal. What Pe bits do you need? Ive got nearly 3 complete 250's and a 175 waitn to be restored. Ive got a few spare bits n pieces for the 250 as I can only get 1 excellent PE out of the three
Cheers
Mark

Title: Re: IT250/465/490 parts clear-out.
Post by: dave on October 14, 2009, 10:33:13 pm

Hey TBM if you have a space PE250/400 alloy swingarm around I might be interested.  ;) ;) ;)

Title: Re: IT250/465/490 parts clear-out.
Post by: caps 999 on October 14, 2009, 10:39:47 pm

nathan i might know somone who would want those 43 mm forks are they much differnt to the yz

Title: Re: IT250/465/490 parts clear-out.
Post by: FourstrokeForever on October 14, 2009, 10:53:03 pm

Dave, Im sure i`ve got a real good swingarm...whats it worth to ya?

Title: Re: IT250/465/490 parts clear-out.
Post by: frostype400 on October 15, 2009, 02:31:45 pm

pm sent TBM sorry not to reply earlier and thread hijacking thanks Michael.

Title: Re: IT250/465/490 parts clear-out.
Post by: Nathan S on October 15, 2009, 03:09:28 pm

Wow, thread from the dead... sorry for being so slow on the uptake - I saw the thread but didn't even realise it was mine... :-[ /  :D

Basically all of the H/J stuff has gone. I'll dob DG26 in as the buyer, because I suspect he'd be happy to off-load some of the stuff that's surplus to his requirements.

The K/L seat has gone, but I think the rest of it is still here. xl59 has got dibbs on the 43mm forks - I'll let you know if he doesn't want them.

TwoTs, its a later type brake plate. Alloy arms, horizontal lug.

Title: Re: IT250/465/490 parts clear-out.
Post by: TwoTees on October 15, 2009, 05:37:11 pm

Quote from: Nathan S on October 15, 2009, 03:09:28 pm

TwoTs, its a later type brake plate. Alloy arms, horizontal lug.

I'll take it. PM sent

Chris

Title: Re: IT250/465/490 parts clear-out.
Post by: Husk72 on October 18, 2009, 06:12:11 pm

RRRRRR,frig! :'(
Missed this thread by that much!!
Nathan,any chance you,or someone else viewing,would happen to have an airbox for an IT490.
Not desperate yet,but getting there!


                                         Cheers,Mark.           

Title: Re: IT250/465/490 parts clear-out.
Post by: pete525 on October 20, 2009, 08:17:19 pm

Anyone know where I would find a YZ250H swingarm

Title: Re: IT250/465/490 parts clear-out.
Post by: Nathan S on October 25, 2009, 06:47:07 pm

Jock, it needs a sleeve.