OzVMX Forum

Marque Remarks => Suzuki => Topic started by: tmkiwi on July 26, 2014, 05:36:52 pm

Title: RM500D Squish
Post by: tmkiwi on July 26, 2014, 05:36:52 pm

Whats a good squish setup on a standard rm500D.
Can run race fuel if needed.

Title: Re: RM500D Squish
Post by: oldyzman on July 26, 2014, 06:06:23 pm

A graham Bell says 1.2mm. I would go a bit more depending on the engines condition, also consider Effective Compression.

Brett
A true ammeter.

Title: Re: RM500D Squish
Post by: tmkiwi on July 26, 2014, 06:22:21 pm

Cheers for that. I was thinking abit more myself. I run my 300 at 1.2 so thought a little more would be normal.
The motor looks be be original. Will measure to see what it is.

Title: Re: RM500D Squish
Post by: oldyzman on July 26, 2014, 08:43:46 pm

Do you have a KTM300exc?
My 300 had about 2.3mm squish standard... soon reduced that

Title: Re: RM500D Squish
Post by: tmkiwi on July 27, 2014, 08:12:19 am

Quote from: oldyzman on July 26, 2014, 08:43:46 pm

Do you have a KTM300exc?
My 300 had about 2.3mm squish standard... soon reduced that

No, I have a TM300. Been running it with 0.9mm on race gas but am changing back to 1.2mm so I can run on pump fuel.