OzVMX Forum

Marque Remarks => Yamaha => Topic started by: ty4 on July 19, 2014, 03:05:13 pm

Title: can anyone ID these pegs
Post by: ty4 on July 19, 2014, 03:05:13 pm

i'm thinking YZ 125 C/X ??

(http://i593.photobucket.com/albums/tt18/ty4album/SAM_0689-1.jpg) (http://s593.photobucket.com/user/ty4album/media/SAM_0689-1.jpg.html)
(http://i593.photobucket.com/albums/tt18/ty4album/SAM_0688-1.jpg) (http://s593.photobucket.com/user/ty4album/media/SAM_0688-1.jpg.html)


CHEERS
TONY

Title: Re: can anyone ID these pegs
Post by: DJRacing on July 19, 2014, 03:23:24 pm

They are not C .  "C" doesn't have the angled brace underneath, well at least they don't on any of my "C's". I have changed the pegs on my X and I can't remember for sure but I do think they are X pegs.
I'm sure someone will correct me if I'm wrong.

Title: Re: can anyone ID these pegs
Post by: ty4 on July 19, 2014, 04:13:49 pm

thanks for the info

Title: Re: can anyone ID these pegs
Post by: OverTheHill on July 20, 2014, 09:20:50 pm

SC500/mx250/360, not sure if link will work but was from an SC500 footrest on ebay. Plus i remember what mine looked like on my MX250 from the same year--due to the fact that i had a bloody stupid idea that the footrests were too far back and extended them forward then promptly wished i hadn't. Jeez i had some stupid theories back then--nothing's changed there then!!.

http://i.ebayimg.com/12/!B-+rEn!B2k~$(KGrHqUOKisEz(CCWkrDBM-TztS!r!~~_1.JPG

Title: Re: can anyone ID these pegs
Post by: Nathan S on July 21, 2014, 09:26:06 pm

Can't see the pic. Apparently it has been moved.

MX/SC and early TT have a 10 or 12mm pin in single shear. There's a difference between MX/SC and TT, but I can't remember what it is...

YZ125C/X have an 8mm bolt in double shear.

Title: Re: can anyone ID these pegs
Post by: ty4 on July 22, 2014, 06:21:14 am

dont know what happened there i'll see if i can find them ...again

Title: Re: can anyone ID these pegs
Post by: Nathan S on July 24, 2014, 08:01:01 pm

....and fixed.

Definitely not YZ-C or YZ-X (which are different to each other, FWIW).

Definitely MX/SC or TT, but I couldn't tell you which. Whatever the difference was, it was minor - 99.99% sure that those pegs will fit either type of bike.

Title: Re: can anyone ID these pegs
Post by: ty4 on July 25, 2014, 04:58:49 pm

thank you kind sir

Title: Re: can anyone ID these pegs
Post by: Davey Crocket on July 25, 2014, 06:04:24 pm

Look like YZ250/360 A/B type, and MX250/400B.

Title: Re: can anyone ID these pegs
Post by: ty4 on July 25, 2014, 09:40:14 pm

oooohh if they fit YZ A'S .....................there worth a fortune  8) ;D ;D ;D ;D ;D